===================================================
          = NB: Over 50% of this message is QUOTED, please  =
          =     be more selective when quoting text         =
          ===================================================

When recording the red light is constant, the record level indicator shows
two bars only, and the disk icon rotates. On playback there is a "white
noise" sound until the end of the recording and then no sound at all. I have
tried it with another Sony cardioid mike that I have had for years and get
the exact same results. I even tried a new Sony "74" MiniDisk for a
recording and.....still the same result.  All signs are indicating that
somehow the "50" has lost its recording capabilities. Lord only knows what
Sony will charge in the way of repairs.
 

> From: [EMAIL PROTECTED] (md-l-mimedigest)
> Reply-To: [EMAIL PROTECTED]
> Date: Sun, 28 May 2000 13:28:51 +0100
> To: [EMAIL PROTECTED]
> Subject: md-l-mimedigest V2 #645
> 
> ok, some of these may be obvious questions but for the sake
> of troubleshooting bear with them.
> 
> was the "red" indicator light solid or flashing
> flashing is standby mode, use puase to drop to record.
> was the mic plugged in all the way?
> is your mic working correctly?  Try it in another device
> to be certain. 
> 
> Beyond that (like I said probably kind of obvious) you might have
> a problem internal on the unit.  (unless you had your record levels
> set wrong, or used line, vs. mic port when recording)
> 
> If none of these appears to be the answer, I'd suggest taking it in
> for service.  I always do level chheck when recording (obviously not
> bootlegging concenerts) to make sure stuff is working.
> 
> no idea if this helps, but hope it at least
> gave you a few things to check.  If you're solid on all of this
> it might be time to get the unit ot a service center.
> 
> =Jeffrey

-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]

Reply via email to