Bernard asked,
| Although I am using a optical digital cable from my Sony MDS-JE530
| to my digital amp.
| The display on the Sony says analog output when a Disk is playing.
If you're talking about the current level display, it will show the analog
output adjustment (which ranges from 20 dB to 0 dB to be subtracted from the
stored levels on the disc if the 530 is like the 520) during playback.
Digital output is always at the levels recorded on the disc, so only the
analog output has an adjustable level. Remember that there is signal from
both the digital and the analog outputs during playback, so the analog out-
put is adjustable at all times during playback. Sometimes the listener is
interested only in the digital output, but the 530 can't know when that is.
On the other hand, there's no display of the digital output adjustment. The
digital output level is not adjustable, so there's nothing to show.
| how do I change this , I cant find any way to do it ?
There's nothing to change except your expectations. If you want to adjust
the level of the digital signal reaching the amplifier, you have to do that
at the amplifier.
-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]
