I have not seen this specifically, but one thing you could try would be to remove the CU2 patch step from the TS. See if the client responds better.
If it does, then deploy the CU2 patch to a collection using the package that was installed (if you chose it) during the CU2 update. Jeff On Fri, Sep 13, 2013 at 1:15 PM, Fritzroy Guillot <[email protected]>wrote: > We have a strange issue that I was hoping someone could help us with. We > are currently using MDT 2012 Integrated in CM12 for our OSD deployments. > Here is the process: > We run our OSD build which completes without any issues, Once the machine > is on the network it then should talk to the CM12 server to pull down the > policies and find the additional applications that should be installed > through software center. > > Problem that we are seeing is that once the builds complete, it seems like > the CM12 client is never fully installed. Some times we are seeing over a > couple of hours before the CM12 client shows fully installed and is > communicating with the CM12 server. That is when applications are showing > up in the software center. > > We are concerned that we have a broken client because the OSD process. > > Couple of things to note, as part of our Task Sequence we are pushing out > the CU2 patch. > > > PATCH="%_SMSTSMDataPath%\OSD\CMP00257\CU2Patch\x64\configmgr2012ac-sp1-kb2854009-x64.msp" > > > -Fritzroy > >
