hi Tony this is your issue "Booted from fixed disk TSBootShell 9/18/2013 8:01:24 PM 864 (0x0360)"
try old fashioned USB media that is detected as removeable and you'll be alright, i am experiencing this exact same issue, that's the only workaround for now that i'm aware of. side note: copying files from an ISO to usb is ok except for UEFI based deployments as the files in the EFI folder on cd media are not the same as on usb created media, if in doubt backup the EFI folder on the usb media and use that instead of the content copied from the CD/DVD iso. cheers niall On Wed, Sep 18, 2013 at 8:33 PM, <[email protected]> wrote: > In SCCM 2012, I want to create OSD Stand Alone media with my company > image on it. My image is a Windows 7 SP1 x64 WIM, which is about 14gb in > size. **** > > ** ** > > I know that there are limitations in the Create Task Sequence Media wizard > as far as ISO size, so I found an article on running the CreateMedia.exe > command, with appropriate switches, to create one large ISO. I did this > using the command below:**** > > ** ** > > CreateMedia.exe /K:"full" /P:”ConfigMgrProvider.company.com" /S:"STE" > /C:"Username=adminuser,Domain=company.com,Password=password" /D:" > distropoint.company.com" /L:"Configuration Manager 2012" /A:"TaskSeqID > /Z:"false" /T:"CD" /M:"44482" /F:"ISO destination Path" /X:"OSDCOMPUTERNAME" > **** > > ** ** > > The ISO creates fine. Using a 32gb thumb drive I make it bootable by:**** > > Diskpart**** > > Select disk 1**** > > Clean**** > > Create Partition Primary**** > > Active**** > > Format fs=ntfs quick**** > > ** ** > > Then using virtual clonedrive, I mount the ISO and copy the contents to > the thumb drive**** > > ** ** > > The thumb boots fine, but when I get to the GUI portion, I get “Unable to > Read Task Sequence Configuration Disk”. SMSTS.log contents below:**** > > ** ** > > LOGGING: Finalize process ID set to 824 TSBootShell > 9/18/2013 8:01:18 PM 828 (0x033C)**** > > ==============================[ TSBootShell.exe > ]============================== TSBootShell > 9/18/2013 8:01:18 PM 828 (0x033C)**** > > Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL' > TSBootShell 9/18/2013 8:01:18 PM 828 (0x033C)**** > > Debug shell is enabled TSBootShell 9/18/2013 8:01:18 PM 828 > (0x033C)**** > > Waiting for PNP initialization... TSBootShell 9/18/2013 8:01:18 > PM 864 (0x0360)**** > > Booted from fixed disk TSBootShell 9/18/2013 8:01:24 PM 864 > (0x0360)**** > > !sVolumeID.empty(), HRESULT=80004005 > (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,477) > TSBootShell 9/18/2013 8:01:24 PM 864 (0x0360)**** > > !sVolumeID.empty(), HRESULT=80004005 > (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,477) > TSBootShell 9/18/2013 8:01:24 PM 864 (0x0360)**** > > !sTSMDataPath.empty(), HRESULT=80070002 > (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,1411) > TSBootShell 9/18/2013 8:01:24 PM 864 (0x0360)**** > > TS::Utility::GetTSMDataPath(rsPath), HRESULT=80070002 > (e:\nts_sccm_release\sms\client\tasksequence\bootshell\configpath.cpp,231) > TSBootShell 9/18/2013 8:01:24 PM 864 (0x0360)**** > > Failed to find the current TS configuration path TSBootShell > 9/18/2013 8:01:24 PM 864 (0x0360)**** > > ConfigPath::FindConfigPath(sConfigPath), HRESULT=80070002 > (e:\nts_sccm_release\sms\client\tasksequence\bootshell\bootshell.cpp,542) > TSBootShell 9/18/2013 8:01:24 PM 864 (0x0360)**** > > Failed to find the configuration path. **** > > The system cannot find the file specified. (Error: 80070002; Source: > Windows) TSBootShell 9/18/2013 8:01:24 PM 864 (0x0360)**** > > Execution failed with error 80070002. TSBootShell 9/18/2013 > 8:01:24 PM 864 (0x0360)**** > > ** ** > > I’ve tried partitioning as NTFS, Fat 32, making the partition less than > 16gb, using a different manufacturer thumb drive. No love.**** > > ** ** > > Has anyone successfully created removable media from a large ISO? Thanks > in advance for any advice offered.**** > > ** ** > > Tony Rodriguez**** > > SCCM Administrator**** > > Modine Manufacturing**** > > ** ** >
