Thanks, that with vmworkstation 10 worked for me From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, October 04, 2013 8:16 AM To: [email protected] Subject: [MDT-OSD] RE: No PXE to VM after ADK 8.0
For vmware, you need to have it using the E1000E nic. Christopher Catlett Consultant | Detroit [cid:[email protected]] Sogeti USA Office 248-876-9738 |Fax 877.406.9647 26957 Northwestern Highway, Suite 130, Southfield, MI 48033-8456 www.us.sogeti.com<http://www.us.sogeti.com/> From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Ratliff Sent: Friday, October 04, 2013 9:06 AM To: [email protected] Subject: [MDT-OSD] RE: No PXE to VM after ADK 8.0 Are you using the legacy NIC? Daniel Ratliff From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Mitchell, Wes Sent: Friday, October 04, 2013 8:57 AM To: [email protected]<mailto:[email protected]> Subject: [MDT-OSD] No PXE to VM after ADK 8.0 Has anyone run into issues PXE into virtual machines(Hyper V, Vmworkstation ver. 7 and 10) after upgrading to SCCM 2012 sp1/ADK 8.0? I am still able to create reference images from my Lite Touch wim(MDT 2012u1) created before the upgrade. PXE to physical hardware works fine. It loads the boot image and then just hangs after the progress bar goes across the screen. Any help would be appreciated. Confidentiality Notice: This e-mail communication and any attachments may contain confidential and privileged information for the use of the designated recipients named above. If you are not the intended recipient, you are hereby notified that you have received this communication in error and that any review, disclosure, dissemination, distribution or copying of it or its contents is prohibited. If you have received this communication in error, please notify me immediately by replying to this message and deleting it from your computer. Thank you. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. ----------------------------------------- Confidentiality Notice: This e-mail communication and any attachments may contain confidential and privileged information for the use of the designated recipients named above. If you are not the intended recipient, you are hereby notified that you have received this communication in error and that any review, disclosure, dissemination, distribution or copying of it or its contents is prohibited. If you have received this communication in error, please notify me immediately by replying to this message and deleting it from your computer. Thank you.
<<inline: image001.jpg>>
