There is nothing built in to allow you to accomplish this. Best bet is to allow the slow way to run.
You could program a reboot, but it would require some complex initializations steps to run. From: [email protected] [mailto:[email protected]] On Behalf Of LEROY Mathieu Sent: Wednesday, November 6, 2013 11:57 AM To: [email protected] Subject: RE: [MDT-OSD] RE : Reboot in WinPE during TS Execution Yes, scripts provided (and updated to manage recents HP boxes) by Johan. Everything run smoothly when i’m putting everything in the StateRestore Phase, but it’s too late because bde takes an hour at least to finish the opération. My customer wants to rape it up quickly to actually send the computers to users, so the offline bitlocker was the answer…. So actually, i’m doing my BIOS/UEFI configuration after the initialization phase, scripts runs ok but it really need a reboot in order to get the TPM up and running. (my customer did not think to ask the OEM to pre configure the BIOS in factory …) Cordialement, Mathieu Leroy Consultant T : +33 3 28 02 53 57 ― M : +33 6 21 63 74 15 ― F : +33 3 28 02 53 06 24 rue Papin - BP 50488 - 59664 Villeneuve d'Ascq Cedex email : [email protected]― web : <http://www.osiatis.com/> www.osiatis.com De : [email protected] [mailto:[email protected]] De la part de [email protected] <mailto:[email protected]> Envoyé : mercredi 6 novembre 2013 19:38 À : [email protected] <mailto:[email protected]> Objet : RE: [MDT-OSD] RE : Reboot in WinPE during TS Execution Are you enabling and activating the TPM using a script, during the task sequence? Christopher Catlett Consultant | Detroit Sogeti USA Office 248-876-9738 |Fax 877.406.9647 26957 Northwestern Highway, Suite 130, Southfield, MI 48033-8456 <http://www.us.sogeti.com/> www.us.sogeti.com From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of LEROY Mathieu Sent: Wednesday, November 06, 2013 12:34 PM To: [email protected] <mailto:[email protected]> Subject: RE: [MDT-OSD] RE : Reboot in WinPE during TS Execution Well, if I don’t reboot before the task « Bitlocker Offline », the ZTIBDE.log say that my TPM is ok, but not enabled and decide not the pre provision Bitlocker. But if I reboot before, the system detect the configuration change (TPM = Enabled) and now the provisionning is enabled. Cordialement, Mathieu Leroy Consultant T : +33 3 28 02 53 57 ― M : +33 6 21 63 74 15 ― F : +33 3 28 02 53 06 24 rue Papin - BP 50488 - 59664 Villeneuve d'Ascq Cedex email : [email protected]― web : <http://www.osiatis.com/> www.osiatis.com De : [email protected] <mailto:[email protected]> [mailto:[email protected]] De la part de Keith Garner Envoyé : mercredi 6 novembre 2013 18:15 À : [email protected] <mailto:[email protected]> Objet : RE: [MDT-OSD] RE : Reboot in WinPE during TS Execution The machine will reboot several times between WinPE, and the time you protect the drive. Once to reboot into the OS Setup, and another time to reboot into the full OS. :) Specifically, what’s the problem you are observing? From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of LEROY Mathieu Sent: Wednesday, November 6, 2013 6:07 AM To: [email protected] <mailto:[email protected]> Subject: [MDT-OSD] RE : Reboot in WinPE during TS Execution TPM is disabled by default, if I enable it, I assume I have to reboot for the change to take effect, correct ? _____ De : [email protected] <mailto:[email protected]> [[email protected]] de la part de [email protected] <mailto:[email protected]> [[email protected]] Date d'envoi : mercredi 6 novembre 2013 15:01 À : [email protected] <mailto:[email protected]> Objet : [MDT-OSD] RE: Reboot in WinPE during TS Execution Why do you think you need to reboot while inside PE? Christopher Catlett Consultant | Detroit Sogeti USA Office 248-876-9738 |Fax 877.406.9647 26957 Northwestern Highway, Suite 130, Southfield, MI 48033-8456 <http://www.us.sogeti.com/> www.us.sogeti.com From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of LEROY Mathieu Sent: Wednesday, November 06, 2013 8:45 AM To: [email protected] <mailto:[email protected]> Subject: [MDT-OSD] Reboot in WinPE during TS Execution Hi Everybody, My customer wants to use Offline Bitlocker with a variety of laptops from differents vendors (HP, DELL, LENOVO) Not a problem with ConfigMgr but is it possible to reboot in WinPE during the task sequence execution in MDT 2012U1 ? Thanks ! Mathieu LEROY
<<image001.png>>
<<image002.jpg>>
