I have tried both. Usually I am in Bridged mode. I normally have the FQDN but figured I would put the IP in just in case it was having issues resolving.
I will take a look at my settings, but it is weird that on the same VM with the same settings I can capture the image without having a pause. Kevin From: [email protected] [mailto:[email protected]] On Behalf Of Saraceno, Rob Sent: Wednesday, November 27, 2013 5:39 PM To: [email protected] Subject: [MDT-OSD] RE: Capturing a VM for reference machine issue Are you using NAT or bridged? I've seen this frequently when people use NAT and thus don't get their normal DHCP configuration and thus MDT can't resolve the short host name (it doesn't know which domain suffix to use). If this is the case, either switching to bridged networking mode or using the FQDN for the server path should resolve. From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Kevin Johnston Sent: Wednesday, November 27, 2013 4:08 PM To: '[email protected]' Subject: [MDT-OSD] Capturing a VM for reference machine issue I am trying to capture a new VM (VMWare 9) to use as my reference image. I have done it before in MDT 2010 U1. I upgraded to MDT 2012 and the previous images still work, but I wanted to create a new fresh image. So I follow the same steps I have done before for having it install windows 7 SP1 and then it capture the .WIM Then I decided to add the LTISuspend script so I can install some apps, then resume and have it capture the .WIM, so it reboots, then comes back to windows and I get this error: [cid:[email protected]] Normally it would just show the progress bar of "capturing wim" So it works when I don't have the LTISuspend, but doesn't when I do add it. I have been battling this and recreated this numerous times. I thought maybe it could be an app that I had installed, but that doesn't make sense cause it is the same apps as the image I created in MDT2010. I know it is not a credential issue, cause I have it is the same as when there is no LTISuspend. I am not sure what else to do, technically this is my first image creation in MDT 2012, so maybe I missed something. I even created a whole new share just to be sure, and nothing. Thanks, Kevin Johnston Junior System Administrator HALOGEN SOFTWARE INC<http://www.halogensoftware.com/>. Talent Management Solution of Choice Tel: 613.270.1011 Ext. 4450| Fax: 613.270.8311 ---------------------------------------------------------------- The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. Bain Capital, LLC Boston, MA USA +1 (617) 516 2000
<<inline: image001.png>>
