Where did you place the LTISuspend step? Does the machine have an IP address before you resume the task sequence?
Thanks, -Michael From: [email protected] [mailto:[email protected]] On Behalf Of Kevin Johnston Sent: Wednesday, January 8, 2014 8:25 PM To: '[email protected]' Subject: [MDT-OSD] Connection Issue to deployment share Okay I have an issue that has been a thorn in my side ever since I upgraded my MDT server from 2010 U1 to 2012 U1. The existing Windows 7 images work fine, and My capture task works fine. So I decided I would build a brand new image, so I use VMware and have a task that does the "install Windows 7 then adds a Pause sequence" This is pretty much just like my old task I have used in the past. So in VMWare I have the OS installed, and I setup my software, etc... then I click on the pause sequence (LTISuspend) and then I get an error A connection to the deployment share could not be made. Connection OK. Possible cause : invalid credentials. I have triple checked that the permissions are right, and the folder has the same rights, etc.. So I figured maybe it is something new with 2012. So I created a whole new share, set it up with vmdrivers, the OS, etc.. and did all the same steps and I still get the same error. It usually reboots and then starts the capture task, but it gives me this error before the VM restarts. I have read some people used the IP address and it worked, so I did that and still nothing. I have looked at the BDD.log and the LitTouch.log files located in the C:\MININT\SMSOSD\OSDLOGS and I don't see anything except the error.. Is there anything I can try to get this to work? Thanks, Kevin Johnston
