We have ran into the similar behavior with servers that have multiple NICs connected, the query to the MP has both IPs and both Subnets, MP return nothing and generates the same error. In our instance, it was due to using AD sites as boundaries and the AD sites are supernetted but no HTTPS here though. MS agreed that this is a bug on the product.
On Fri, May 30, 2014 at 11:33 AM, Brian Marobella < [email protected]> wrote: > Yes. NIC drivers are installed and the system gets and IP address. As > well, I’m able to ping all Management Points. > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Jason Sandys > *Sent:* Thursday, May 29, 2014 7:48 PM > *To:* [email protected] > *Subject:* RE: [MDT-OSD] Failed to Query MP while booted to OSD WinPE > Boot Image > > > > Have they verified that the current NIC drivers are even in the boot image > by doing a simple ipconfig once in WinPE? This should always be the first > first thing checked. > > > > J > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *Brian Marobella > *Sent:* Thursday, May 29, 2014 1:01 PM > *To:* [email protected] > *Subject:* [MDT-OSD] Failed to Query MP while booted to OSD WinPE Boot > Image > > > > Hello, > > We are running into an issue when booting to the OSD Boot image to install > OSD images. The issue is the client is failing to contact the MP when > booted to WinPE. I get the following error in the smsts.log > > > > MP Location returned an empty site code > > CCM::SMSMessaging::CLibSMSMPLocation::RequestMPLocation failed; 0x80004005 > > MPLocation.RequestMPLocation (szTrustedRootKey, sIPSubnets.c_str(), > sIPAddresses.c_str(), sSiteCode, sAssignedSiteCode, sMP, sMPCertificates, > sX86UnknownMachineGUID, sX64UnknownMachineGUID), HRESULT=80004005 > (e:\qfe\nts\sms\framework\osdmessaging\libsmsmessaging.cpp,9583) > > CCM::SMSMessaging::GetMPLocation failed; 0x80004005 > > Failed to query https://ourserver.domain.com for MP location > > > > Here are some notes/facts: > > 1. Client is in a remote location with a Secondary MP > > 2. Can deploy and install OSD images to existing SCCM clients in > the same site via Software Center. This only fails when booting to the OSD > Boot Iso. > > 3. We use HTTPS for all client communication > > 4. Added the ConfigMgr Distribution Point Certificate and also > tried adding the ConfigMgr Client Certificate to OSD Boot image > > 5. Site Boundaries are configured properly > > 6. Boot image is set to Dynamic > > 7. ConfigMgr Version is 2012 SP1 CU2 > > > > The only Management Point that I can select when creating the boot ISO is > the Primary MP. Should I have the option to select the Secondary MP? > > > > At the moment, remote admins have to do a default Windows build, add > client to domain, then I push the OSD image to the client to install our > custom image. > > > > Any advices, help would be much appreciated. > > > > Thanks >
