Stream of consciousness questions… :):
Not clear to me *where/when* this is happening… On which machines (uefi? Make/Model), and what the problem scenario is. Is this happening during WDS boot menu selection? During the Kernel loader? Or when WinPE has fully started? MDT and OSD both put their dialogs at the center of the screen, so that can’t be the problem. Does the problem go away if you connect to a CRT (not flat panel) monitor, Yes, I know it’s 2014, but still… Or are you talking about the sync range of the monitor? Specifically what resolution is it running at? (Typically monitors will say what the offending resolution refresh rate is). BY default in MDT, the unattend.xml file is set to 1024 x 768 x 32bits x 60Hz: C:\Program Files\Microsoft Deployment Toolkit\Templates\Unattend_PE_x64.xml Your machine could also have driver problems and/or a BSOD, I once had a problem with some uEFI Intel Prototype motherboards where the screen would go black, the symptoms appeared to be just like a BSOD, however the machine wouldn’t reboot. The only way I knew for sure that the machine was still working was that I had to type blind into my WinPE image: F8 --> wpeutil shutdown when the machine actually shutdown, I was able to rule out BSOD, and I could work on other scenarios. It turned out that the display driver was just not working, and *NOTHING* was getting sent to the display driver, it was *not* a refresh issue, but a uEFI firmware issue. -k From: [email protected] [mailto:[email protected]] On Behalf Of steven hosking Sent: Wednesday, July 9, 2014 2:26 PM To: [email protected] Subject: [MDT-OSD] Setting Screen Resolution for the WinPE Session Hi Guys, we have an odd one where when building the new computers from PxE or media the screen we have attach goes out of range (Yes yes before you ask we have change the screen out, but still having the issue as a result of the KVM we think) and then blank so if our guys aren’t quick enough selecting the TS they want to build with they have to restart the screen, it’s a mild annoyance but just wondering if there is a way to define the Resolution for the WinPE at the initial boot time where you get prompted for the password and to select the TS? any advice would be great. Cheers Steve
