Hi Michael, Thanks for the advice, but unfortunately it still is asking for "Invalid credentials. The Network path was not found".
Regards, Dave From: [email protected] [mailto:[email protected]] On Behalf Of Michael Niehaus Sent: Monday, August 04, 2014 5:16 PM To: [email protected] Subject: [MDT-OSD] RE: PXE boot problem on new MDT server You fixed the bootstrap.ini, updated the deployment share to generate new boot WIM files, and then imported those new WIM files into WDS, right? That should be all that is needed, assuming Windows PE can correctly resolve the new computer name. Thanks, -Michael From: [email protected] [mailto:[email protected]] On Behalf Of David Landry Sent: Monday, August 4, 2014 2:03 PM To: [email protected] Subject: [MDT-OSD] PXE boot problem on new MDT server Hi All, I have migrated our file server (which also has MDT on it) to a new server. The only issue I am having is with MDT. When I do a PXE boot it finds the new server and starts to load. I get to where I enter my credentials and I get an error "Invalid credentials. The Network path was not found" I have checked the permissions and DHCP server options (also on the server). I originally had just 060 (on the original server), but was told to remove 060 and configure 066 and 067 (neither were on the original server). No change after making these changes. I also have a server at another site that has MDT on it that is configured the same as the original server here. No problems at that site. I also found that the bootstrap.ini file was pointing to the wrong server. I fixed that, but it is still not working. Anyone have any ideas? Thanks in advance for your responses. Dave
