I have gotten a little further, I was able to re-capture the wim file that got me past applying the wim, now I am getting an error on applying drivers task. All I have in the driver package is the DELL PERC Virtual Device, PERC H310 Driver, and the nic. Attached is the the log file. Any help would be greatly appreciated!
-Josh -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Denzik, Josh Sent: Friday, September 26, 2014 4:17 PM To: [email protected] Subject: RE: [MDT-OSD] WIM Failing to Apply Okay another update, redistributed the wim, forced it download, same error. Also added the 8.1 nic driver in there....same result -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Denzik, Josh Sent: Friday, September 26, 2014 3:34 PM To: [email protected] Subject: RE: [MDT-OSD] WIM Failing to Apply Funny you say that we have a T5500 with the same issue, only one SSD drive though... -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Etienne Croteau Sent: Friday, September 26, 2014 3:27 PM To: [email protected] Subject: RE: [MDT-OSD] WIM Failing to Apply I remember having some issues with Precision T5500 (3 hd - raid0 on sata1-2, ssd on sata0), was trying to image that ssd. At the end, I gave up and disabled sata1 and sata2 drives in bios, then image, then enable them back. Do you happen to have multiple drives in your systems? -----Message d'origine----- De : [email protected] [mailto:[email protected]] De la part de David van Beek Envoyé : 26 septembre 2014 14:37 À : [email protected] Objet : Re: [MDT-OSD] WIM Failing to Apply Are you able to see the locally installed harddisk(s) when pressing F8 in Winpe? Sent from my iPhone Met vriendelijke groet / With kind regards, David van Beek > On 26 sep. 2014, at 20:07, Daniel Ratliff <[email protected]> wrote: > > It cannot find the image file on the DP. It is also set to run from the > network, is this intended? This setting is on the Options tab of the Apply OS > step in your TS. > > Can you verify the image is properly distributed to the DPs? You may want to > check any network settings at the time it fails as well. > > A few posts online also point to a boot image NIC driver not being the > correct one. Might as well double check that for this model. > > Daniel Ratliff > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Denzik, Josh > Sent: Friday, September 26, 2014 1:53 PM > To: [email protected] > Subject: RE: [MDT-OSD] WIM Failing to Apply > > Attached is the full log file: > > Some more information to this; this wim works on all other machines it's a > brand new wim that was recently captured. Our Precisions have xeon processors > in them. Im thinking that wim file might be suspect.... > > Thanks in Advance Josh > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Daniel Ratliff > Sent: Friday, September 26, 2014 11:59 AM > To: [email protected] > Subject: RE: [MDT-OSD] WIM Failing to Apply > > Can you attach the full smsts.log? One single line out of context doesn't > help much. > > Daniel Ratliff > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Denzik, Josh > Sent: Friday, September 26, 2014 11:45 AM > To: [email protected] > Subject: [MDT-OSD] WIM Failing to Apply > > > > >> >> >> I have a couple of Dell Precision T5600 workstations that I cannot get the >> Apply Operating System step of a Task Sequence to complete on. This is what >> appears in the smsts.log file... >> >> >> "Failed to open "Software\Microsoft\Windows NT\CurrentVersion"" >> >> >> and >> >> >> "Installation of image 1 in package XXXX failed to complete the system >> cannot find the file specified" >> >> >> I have injected the correct AHCI/RAID drivers into the boot.wim thinking >> that could be the problem but have had no success with it. Also, this same >> exact Task Sequence works on every other Dell and Lenovo product we have >> without issue. I'm stumped at this point. If there's anyone who can provide >> some other insight or have run into this before, I would greatly appreciate >> and help you can provide. Thanks in advance! >> >> >> >> >> >> Jason Fose >> System Engineer >> Medical University of South Carolina >> >> Sent from my Android phone using TouchDown (www.nitrodesk.com) > > > > The information transmitted is intended only for the person or entity to > which it is addressed and may contain CONFIDENTIAL material. If you receive > this material/information in error, please contact the sender and delete or > destroy the material/information. > > > > The information transmitted is intended only for the person or entity > to which it is addressed and may contain CONFIDENTIAL material. If > you receive this material/information in error, please contact the sender and > delete or destroy the material/information. > >
logs.rar
Description: logs.rar
