No I am using MDT network key to boot into WINPE and connect to the deployment share
George On Wed, Dec 3, 2014 at 12:47 PM, Bain.John <john.b...@cic.gc.ca> wrote: > Your using offline media to image those systems ? > > > > John > > > > *From:* listsad...@lists.myitforum.com [mailto: > listsad...@lists.myitforum.com] *On Behalf Of *George Salmaniw > *Sent:* December 3, 2014 12:42 PM > *To:* mdtosd@lists.myitforum.com > *Subject:* Re: [MDT-OSD] "Please reinsert the media (CD, DVD, or USB) > needed to complete the deployment" message. > > > > Check BIOS versions ... these can sometimes cause issues with MDT/SCCM > > We have approx 600 of these models and have not had any issues. Maybe the > MOBO changed? > > > George > > > > On Wed, Dec 3, 2014 at 11:30 AM, Bain.John <john.b...@cic.gc.ca> wrote: > > Yeah I have one in the lab aswell that images fine, but out in the field I > am getting mixed reports that ever 5th or 6th system gets the popup. > > > > I have yet to see the popup first hand, but I’m curious to see there is > some variation in these 6005s > > > > *From:* listsad...@lists.myitforum.com [mailto: > listsad...@lists.myitforum.com] *On Behalf Of *George Salmaniw > *Sent:* December 3, 2014 11:11 AM > *To:* mdtosd@lists.myitforum.com > *Subject:* Re: [MDT-OSD] "Please reinsert the media (CD, DVD, or USB) > needed to complete the deployment" message. > > > > We have no problem deploying to HP 6005 PCs John. > > Actually I have one sitting beside me in my lab that I use to QA my > updated deployments. > > I know certain models of HP are a pain, as you have to select the > appropriate USB port [e.g. 8560, 8540] in order to WINPE to recognize the > key. > > I have not run into that situation with the 6005 though; always use the > ports on the front panel. > > George > > > > > > On Wed, Dec 3, 2014 at 9:49 AM, Bain.John <john.b...@cic.gc.ca> wrote: > > Well that’s kind of the thing. > > > > On the first boot of windows the system doesn’t see the usb thumb drive > and to make matters worse this system(Hp 6005) uses windows drivers for it > USB support … just regular usb 2 drivers > > > > So when I unplug and plugback in the thumbdrive MS drivers are what gets > installed > > > > *From:* listsad...@lists.myitforum.com [mailto: > listsad...@lists.myitforum.com] *On Behalf Of *Keith Garner > *Sent:* December 2, 2014 1:26 PM > *To:* mdtosd@lists.myitforum.com > *Subject:* RE: [MDT-OSD] "Please reinsert the media (CD, DVD, or USB) > needed to complete the deployment" message. > > > > If you are performing an offline media installation, then the MDT > LiteTouch scripts will search for the offline media on the local computer. > What is happening here is that the scripts can’t see the media folders on > any of the drives. I suspect that the root cause is that the > hardware/drivers are not correctly identifying your USB media, so the > drives never show up. > > > > When you see this message next time, verify the driver is working > correctly by opening up the Device Manager. > > Is the USB Flash Drive detected? Or does it have a Yellow <!> bang next to > the device? > > > > If the device is detected by the USB bus enumerator, yet the driver failed > to install, Check the SetupAPI.*.log files for driver install errors. > > Does a reboot solve the problem? Do you have the latest certified drivers > for this USB Controller/System? > > > > Unfortunately, there is not much you can do within MDT if the root cause > of the problem is Hardware/Driver related. > > > > -k > > > > *From:* listsad...@lists.myitforum.com [ > mailto:listsad...@lists.myitforum.com <listsad...@lists.myitforum.com>] *On > Behalf Of *Bain.John > *Sent:* Tuesday, December 2, 2014 8:54 AM > *To:* mdtosd@lists.myitforum.com > *Subject:* [MDT-OSD] "Please reinsert the media (CD, DVD, or USB) needed > to complete the deployment" message. > > > > [image: cid:image001.png@01D00A6E.D15EB6B0] > > > > I’ve only ever seen this on Media based MDT(MDT 2013) deployments on a few > pieces of hardware, but has anyone been able to properly resolve this popup > ? > > > > A technician will receive this message on the first boot into Windows 7, > right after the deployment has left WinPE. > > > > Clicking Ok causes the popup message to reappear. > > > > The only way to resolve the issue is unplug and plug back in the USB(USB > 3.0) thumb drive that contains the deployment point then clicking Ok. > > > > Litetouch then fires off properly and the popup is never seen for the rest > of the deployment. > > > > The deployment contains multiple reboots. > > > > John > > > > >
