Thanks for the reply. That one works for the x64 boot image without a problem. However, the x86 boot image still does not work. I tried the x86 version of that same driver as well. I did read about a specific driver that I could try that's associated with a different model Latitude which I have also tried but still could not get to work. I'm at a loss on this one. Any other ideas? I'd be glad to hear them. Thanks.
Jason Fose System Engineer II OCIO-IS Managed Desktop Team Medical University of South Carolina From: [email protected] [mailto:[email protected]] On Behalf Of Daniel Ratliff Sent: Tuesday, March 3, 2015 12:46 PM To: [email protected] Subject: RE: [MDT-OSD] Latitude E5450 WinPE 5.0 Driver Did you use this one? http://en.community.dell.com/techcenter/enterprise-client/w/wiki/7595.latitude-e54505450-windows-8-1-driver-pack x64 Network Intel I2xx/825xx 10/10 0/1000 Ethernet Networ k Drivers Daniel Ratliff From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Fose, Jason Sent: Tuesday, March 03, 2015 12:42 PM To: [email protected]<mailto:[email protected]> Subject: [MDT-OSD] Latitude E5450 WinPE 5.0 Driver Good afternoon all, I have run into an issue with a Dell Latitude E5450 Laptop that seemingly will not PXE boot with any compatible driver I throw at it. I've downloaded the CAB file from Dell and have also downloaded the newest driver from Intel with no luck. The NIC is an Intel(r) Ethernet Controller (3) I218-LM. We use WinPE 5.0 and are trying to image the laptop with Windows 7 32 and 64 bit. I have found a couple of blogs that instruct me on how to edit INF files but I didn't want to go that far just yet. Has anyone else seen anything like this or have run into a similar situation? Any help would be greatly appreciated. Thanks in advance. Jason Fose System Engineer II OCIO-IS Managed Desktop Team Medical University of South Carolina The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
