Not just MSHTA.EXE, there are lots of High-DPI problems in windows 10 right now.
My Dell XPS 13 9350 had super high dot pitch, and all kinds of scaling problems, this OOBE EULA screen was just one example. Ugh. From: [email protected] [mailto:[email protected]] On Behalf Of Michael Niehaus Sent: Friday, May 6, 2016 12:05 PM To: [email protected] Subject: RE: [MDT-OSD] MDT WinPE Booting into UEFI Resolution Issue We're aware of the issues, which happen on "high DPI" devices with very large screen resolutions, e.g. something like 3000x2000. The HTA wizards used by MDT aren't being scaled appropriately, resulting in the problems you are seeing. (And if you disable the scaling, the resulting wizards are so small you can't really use them.) As a workaround, some customers have tweaked the Wizard.css file to create a "high DPI" version of it, then added logic to MDT to use the appropriate file for high DPI systems. We are hoping to find a better long-term solution. Thanks, -Michael From: [email protected] <mailto:[email protected]> [mailto:[email protected]] On Behalf Of Brian Marobella Sent: Friday, May 6, 2016 11:51 AM To: [email protected] <mailto:[email protected]> Subject: [MDT-OSD] MDT WinPE Booting into UEFI Resolution Issue Seems like UEFI/Windows 10 is a hot topic lately. We just received our new Lenovo hardware (T460, P50, M900/m700) and, up until this past Monday, it was impossible to install Windows 10 on this new hardware in BIOS Legacy Mode with SSDs. Luckily, Lenovo released a new BIOS that fixes the issue. When we boot to MDT WinPE in UEFI, the screen resolution is all messed up. The MDT wizards need to be resized and the fonts are tiny. I found some articles on how to fix this for SCCM Boot Media/Task Sequences, but I haven't found any information on a fix for MDT only booting. Adding the graphics drivers to WinPE does not fix this issue. Anyone have any suggestions? Thanks Brian Marobella
