We’re seeing the exact same behavior you’re seeing with some HP tablets, Elite X2 1012 G1’s. Working with HP to figure out what’s going on. We can set the UEFI boot order to SATA 1st and USB second and then deploy our image. When it reboots, I can go into the BIOs and see that the boot order has been switched to USB first.
HP had us uncheck the Fast Boot option in BIOs but that didn’t change our issue. Today, HP third level support asked us to FedEx the tablet back to them so they can check it out. At this point, we’re changing all the boot options to Legacy to get the tablets out. From: [email protected] [mailto:[email protected]] On Behalf Of Augustine, Greg Sent: Thursday, October 20, 2016 8:58 AM To: '[email protected]' <[email protected]> Subject: [MDT-OSD] SCCM Standalone media and UEFI We are working with a USB key for sites that have 1 or 2 computers for reimaging. When we set the computer to use UEFI and remove the legacy options the USB key boots and starts the imaging process. When the computer reboots it always boots to the USB key unless it is removed. We have even selected the 2 different windows boot manager option on the boot menu and they both boot the USB key. Any suggestions? Greg Augustine Office of Administration Information Technology Services Division – State Data Center (573)-751-4714 ________________________________ CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
