I would recommend re-creating task sequences that are that old, and also make sure your boot images are updated (including the ones added to WDS servers, etc.).
/ Johan Johan Arwidmark Microsoft MVP - Cloud and Datacenter Management CTO - TrueSec E-mail: [email protected]<mailto:[email protected]> Twitter: @jarwidmark<http://twitter.com/jarwidmark> Web: https://truesec.com Blog: https://deploymentresearch.com Mobile: +1 630 881 8852 Address: Oxtorgsgrand 2, 111 57 Stockholm, Sweden From: [email protected] [mailto:[email protected]] On Behalf Of DinYero Johnson Sent: den 23 januari 2018 13:24 To: [email protected] Subject: [MDT-OSD] MDT 8450 LTIApply.wsf /post error Hello all, I just updated my MDT 2013 installation to 8450 so that I could deploy 1709, and I ran into an issue with an existing task sequence where it fails on LTIApply.wsf /post step. I've linked the dump on pastebin here: https://pastebin.com/raw/6deWDJKB Processing through cmtrace shows that it exits with code 1, and states that its an incorrect function. There's been no modifications to the LTIApply.wsf except to re-add support for applying with images with the CompactOS switch. As a test, I modified that task sequence step to continue on error, and the whole sequence finishes (albeit with minor errors). I'm just wondering if anyone else has run into the same issue. Thanks, DinYero Johnson | Project Engineer Datapath * 318 McHenry Ave. Modesto, Ca. 95354 Main Office: 209-521-0055 Web: mydatapath.com<http://www.mydatapath.com/> [cid:CAE66C89-A6C8-4829-8B24-7F782BAE72DA]
