Then your issue is not with Me TV which requires you to have a working DVB setup. From my understanding, if the driver has loaded correctly then you should have a /dev/dvb directory.
-- not recognize my intuix S810 https://bugs.launchpad.net/bugs/246722 You received this bug notification because you are a member of Me TV Development, which is subscribed to Me TV. Status in Me TV, it's TV for me computer: Confirmed Bug description: Hi , thanks fot this software, but it not recognize my tnt tunner. On packet there are TNT / DVB-T me-tv Me TV-Message: 08.07.2008 21:44:18 - Me TV Version: 0.5.25 Me TV-Message: 08.07.2008 21:44:18 - Chargement du fichier glade '/usr/share/me-tv/glade/me-tv.glade' en cours Me TV-Message: 08.07.2008 21:44:19 - Création du GEP dans '/home/xx/.me-tv/epg.xml' Me TV-Message: 08.07.2008 21:44:19 - GEP chargé Me TV-Message: message d'exception: 'Pas de tuner' Me TV-Message: 08.07.2008 21:44:19 - Exception dans void Application::init() : Pas de tuner Me TV-Message: 08.07.2008 21:44:21 - Arrêt normal de l'application I have Ubuntu hardy last release + updates lsusb Bus 002 Device 004: ID 04ca:f001 Lite-On Technology Corp. <== My Intuix Bus 002 Device 002: ID 05ca:1810 Ricoh Co., Ltd Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 dmesg [ 2152.781235] usb 2-1: new high speed USB device using ehci_hcd and address 3 [ 2152.855739] usb 2-1: configuration #1 chosen from 1 choice [ 2153.003853] dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in cold state, will try to load a firmware [ 2153.026691] dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw' [ 2153.053332] usbcore: registered new interface driver dvb_usb_dibusb_mc [ 2153.054640] usb 2-1: USB disconnect, address 3 [ 2153.055268] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. [ 2154.260509] usb 2-1: new high speed USB device using ehci_hcd and address 4 [ 2154.339015] usb 2-1: configuration #1 chosen from 1 choice [ 2154.341125] dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in warm state. [ 2154.341426] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 2154.343323] DVB: registering new adapter (LITE-ON USB2.0 DVB-T Tuner) [ 2154.345354] dvb-usb: no frontend was attached by 'LITE-ON USB2.0 DVB-T Tuner' [ 2154.346189] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0b.1/usb2/2-1/input/input10 [ 2154.376612] dvb-usb: schedule remote query interval to 150 msecs. [ 2154.376621] dvb-usb: LITE-ON USB2.0 DVB-T Tuner successfully initialized and connected. Thanks for help. _______________________________________________ Mailing list: https://launchpad.net/~me-tv-development Post to : [email protected] Unsubscribe : https://launchpad.net/~me-tv-development More help : https://help.launchpad.net/ListHelp
