March 28, 2009

Do New Bulbs Save Energy if They Don’t Work?
By LEORA BROYDO VESTEL
NY Times

http://www.nytimes.com/2009/03/28/business/energy-environment/28bulbs.html?em=&pagewanted=print


SAN FRANCISCO — It sounds like such a simple thing to do: buy some new 
light bulbs, screw them in, save the planet.

But a lot of people these days are finding the new compact fluorescent 
bulbs anything but simple. Consumers who are trying them say they 
sometimes fail to work, or wear out early. At best, people discover that 
using the bulbs requires learning a long list of dos and don’ts.

Take the case of Karen Zuercher and her husband, in San Francisco. 
Inspired by watching the movie “An Inconvenient Truth,” they decided to 
swap out nearly every incandescent bulb in their home for energy-saving 
compact fluorescents. Instead of having a satisfying green moment, 
however, they wound up coping with a mess.

“Here’s my sad collection of bulbs that didn’t work,” Ms. Zuercher said 
the other day as she pulled a cardboard box containing defunct bulbs 
from her laundry shelf.

One of the 16 Feit Electric bulbs the Zuerchers bought at Costco did not 
work at all, they said, and three others died within hours. The bulbs 
were supposed to burn for 10,000 hours, meaning they should have lasted 
for years in normal use. “It’s irritating,” Ms. Zuercher said.

Irritation seems to be rising as more consumers try compact fluorescent 
bulbs, which now occupy 11 percent of the nation’s eligible sockets, 
with 330 million bulbs sold every year. Consumers are posting vociferous 
complaints on the Internet after trying the bulbs and finding them lacking.

Bulb makers and promoters say the overall quality of today’s compact 
fluorescents is high. But they also concede that it is difficult to 
prevent some problem bulbs from slipping through.

Experts say the quality problems are compounded by poor package 
instructions. Using the bulbs incorrectly, like screwing low-end bulbs 
into fixtures where heat is prone to build up, can greatly shorten their 
lives.

Some experts who study the issue blame the government for the quality 
problems, saying an intensive federal push to lower the price 
essentially backfired by encouraging manufacturers to use cheap components.

“In the pursuit of the holy grail, we stepped on the consumer,” said 
Michael Siminovitch, director of a lighting center at the University of 
California, Davis.

Compact fluorescents once cost as much as $30 apiece. Now they go for as 
little as $1 — still more than regular bulbs, but each compact 
fluorescent is supposed to last 10 times longer, save as much as $5.40 a 
bulb each year in electricity, and reduce emissions of carbon dioxide 
from burning coal in power plants.

Much of the credit for that sharp cost decline goes to the Energy 
Department. The agency asked manufacturers in 1998 to create cheaper 
models and then helped find large-volume buyers, like universities and 
utilities, to buy them. That jump-started a mass market and eventually 
led to sales of discounted bulbs at retailers like Costco, Wal-Mart 
Stores and Home Depot.

Consumers are supposed to be able to protect themselves by buying bulbs 
certified under the government’s Energy Star program. But experts and 
some environmental groups complain that Energy Star standards are weak, 
permitting low-quality bulbs with too high a level of mercury, a toxic 
metal contained in all compact fluorescents.

“The standard essentially establishes a floor, which sorts out the junk, 
with the expectation that the rest is good,” Mr. Siminovitch said. “It’s 
not.”

The government, which will begin enforcing tighter specifications this 
year, says it must seek a balance between quality and affordability to 
achieve its goal of getting millions of additional consumers to install 
the bulbs.

“Something that is perfect but not affordable wouldn’t serve the broad 
interests,” said Peter Banwell, the Energy Department’s manager of 
product marketing for Energy Star.

Alan Feit, vice president of Feit Electric, says he does not think the 
problems experienced by the Zuerchers indicate an overall quality 
problem with his bulbs. But he acknowledged the difficulty of keeping 
tight quality control on a cheap, mass-market item. “There are 40 to 50 
components that go into these things,” Mr. Feit said. “While 
manufacturers try to inspect all incoming materials, one little mistake 
may cause a performance problem.”

Victor Roberts, an independent expert in Burnt Hills, N.Y., who conducts 
failure analysis testing on compact fluorescents, suspects that some 
suppliers — many of them in China — are using substandard components.

“Somebody decides to save a little money somewhere,” he said, “and 
suddenly we have hundreds of thousands of failures.”

The Program for the Evaluation and Analysis of Residential Lighting at 
Rensselaer Polytechnic Institute in Troy, N.Y., tests Energy 
Star-certified bulbs to see if they still meet requirements.

In the 2007-8 tests, five of 29 models failed to meet specifications for 
such categories as lifespan, luminosity and on-off cycling and were 
removed from Energy Star’s list of qualified products. Because of 
performance concerns, the government is expanding the watchdog program, 
vowing to test samples of 20 percent of the thousands of certified bulb 
models each year.

In California, where bulbs have been heavily encouraged, utilities have 
concluded that they will not be able to persuade a majority of consumers 
to switch until compact fluorescents get better. That is prompting them 
to develop specifications for a better bulb.

The effort aims to address the most consumer complaints: poor dimming, 
slow warm-up times, shortened bulb life because of high temperatures 
inside enclosed fixtures, and dissatisfaction with the color of the light.

“Because of the aggressive goals in California, we have to be pushing 
the envelope at all times,” said Roland Risser, director of customer 
efficiency at Pacific Gas and Electric.

Experts and bulb manufacturers say that consumers need to play a role in 
solving the problems by learning more about the limitations of compact 
fluorescent bulbs. The Federal Trade Commission has begun to study 
whether it should force improvements in the labels of the bulbs.

Better labels might have helped the Zuerchers, the San Francisco couple. 
Initially, they put regular compact fluorescents in virtually every 
socket in their home, including enclosed ceiling lamps, dimmable 
fixtures and areas where lights are turned on and off frequently.

But some of those applications require specialized, more expensive 
bulbs, something the Zuerchers say was not made clear on the label of 
their Feit bulbs or on any sign they saw posted at Costco.

“We’re both college-educated and pay attention to labels we read,” Ms. 
Zuercher said. “It feels like someone forgot to put a place to find the 
information.”

-- 
================================
George Antunes, Political Science Dept
University of Houston; Houston, TX 77204 
Voice: 713-743-3923  Fax: 713-743-3927
Mail: antunes at uh dot edu

***********************************
* POST TO [email protected] *
***********************************

Medianews mailing list
[email protected]
http://lists.etskywarn.net/mailman/listinfo/medianews

Reply via email to