jenkins-bot has submitted this change and it was merged. Change subject: Fix more global var access ......................................................................
Fix more global var access Change-Id: I2a268227b9c63d717a4059f31be5e23ab6e3a454 --- M SemanticMediaWiki.settings.php 1 file changed, 84 insertions(+), 84 deletions(-) Approvals: Mwjames: Looks good to me, approved jenkins-bot: Verified diff --git a/SemanticMediaWiki.settings.php b/SemanticMediaWiki.settings.php index db4db8f..8aad1a8 100644 --- a/SemanticMediaWiki.settings.php +++ b/SemanticMediaWiki.settings.php @@ -39,14 +39,14 @@ # If needed, you can also change this path in LocalSettings.php after including # this file. ## -$smwgIP = dirname( __FILE__ ) . '/'; +$GLOBALS['smwgIP'] = dirname( __FILE__ ) . '/'; ## ### # Use another storage backend for Semantic MediaWiki. The default is suitable # for most uses of SMW. ## -$smwgDefaultStore = "SMWSQLStore3"; +$GLOBALS['smwgDefaultStore'] = "SMWSQLStore3"; ## ### @@ -70,11 +70,11 @@ # supports this. Different wikis should normally use different default graphs # unless there is a good reason to share one graph. ## -$smwgSparqlDatabase = 'SMWSparqlDatabase'; -$smwgSparqlQueryEndpoint = 'http://localhost:8080/sparql/'; -$smwgSparqlUpdateEndpoint = 'http://localhost:8080/update/'; -$smwgSparqlDataEndpoint = 'http://localhost:8080/data/'; -$smwgSparqlDefaultGraph = ''; +$GLOBALS['smwgSparqlDatabase'] = 'SMWSparqlDatabase'; +$GLOBALS['smwgSparqlQueryEndpoint'] = 'http://localhost:8080/sparql/'; +$GLOBALS['smwgSparqlUpdateEndpoint'] = 'http://localhost:8080/update/'; +$GLOBALS['smwgSparqlDataEndpoint'] = 'http://localhost:8080/data/'; +$GLOBALS['smwgSparqlDefaultGraph'] = ''; ## ### @@ -85,13 +85,13 @@ # existing pages in this namespace cannot be found in the wiki. ## if ( !isset( $smwgHistoricTypeNamespace ) ) { - $smwgHistoricTypeNamespace = false; + $GLOBALS['smwgHistoricTypeNamespace'] = false; } ## ### # If you already have custom namespaces on your site, insert -# $smwgNamespaceIndex = ???; +# $GLOBALS['smwgNamespaceIndex'] = ???; # into your LocalSettings.php *before* including this file. The number ??? must # be the smallest even namespace number that is not in use yet. However, it # must not be smaller than 100. @@ -104,16 +104,16 @@ # __HIDEFACTBOX__ can be used to control Factbox display for individual pages. # Other options for this setting include: ## -// $smwgShowFactbox = SMW_FACTBOX_NONEMPTY; # show only those factboxes that have some content -// $smwgShowFactbox = SMW_FACTBOX_SPECIAL # show only if special properties were set -$smwgShowFactbox = SMW_FACTBOX_HIDDEN; # hide always -// $smwgShowFactbox = SMW_FACTBOX_SHOWN; # show always, buggy and not recommended +// $GLOBALS['smwgShowFactbox'] = SMW_FACTBOX_NONEMPTY; # show only those factboxes that have some content +// $GLOBALS['smwgShowFactbox'] = SMW_FACTBOX_SPECIAL # show only if special properties were set +$GLOBALS['smwgShowFactbox'] = SMW_FACTBOX_HIDDEN; # hide always +// $GLOBALS['smwgShowFactbox'] = SMW_FACTBOX_SHOWN; # show always, buggy and not recommended ## ### # Same as $smwgShowFactbox but for edit mode and same possible values. ## -$smwgShowFactboxEdit = SMW_FACTBOX_NONEMPTY; +$GLOBALS['smwgShowFactboxEdit'] = SMW_FACTBOX_NONEMPTY; ## ### @@ -121,7 +121,7 @@ # of that page using Special:Browse? This is a useful way to access properties # and it is somewhat more subtle than showing a Factbox on every page. ## -$smwgToolboxBrowseLink = true; +$GLOBALS['smwgToolboxBrowseLink'] = true; ## ### @@ -129,7 +129,7 @@ # This affects only semantic annotations, not warnings that are displayed by # inline queries or other features. ## -$smwgInlineErrors = true; +$GLOBALS['smwgInlineErrors'] = true; ## ### @@ -141,7 +141,7 @@ # category page. Only if the setting is false will such annotations be shown in # the factbox (if enabled). ## -$smwgUseCategoryHierarchy = true; +$GLOBALS['smwgUseCategoryHierarchy'] = true; ## ### @@ -150,7 +150,7 @@ # category pages elements of other categories. See also the above setting # $smwgUseCategoryHierarchy. ## -$smwgCategoriesAsInstances = true; +$GLOBALS['smwgCategoriesAsInstances'] = true; ## ### @@ -162,7 +162,7 @@ # or be offered to download "index.php". It might be okay to enable this if # such problems are not observed in your wiki. ## -$smwgLinksInValues = false; +$GLOBALS['smwgLinksInValues'] = false; ## ### @@ -170,22 +170,22 @@ # function: the default number of instances defined, if no end date is set; # and the maximum number that can be defined, regardless of end date. ## -$smwgDefaultNumRecurringEvents = 100; -$smwgMaxNumRecurringEvents = 500; +$GLOBALS['smwgDefaultNumRecurringEvents'] = 100; +$GLOBALS['smwgMaxNumRecurringEvents'] = 500; ## ### # Should the browse view for incoming links show the incoming links via its # inverses, or shall they be displayed on the other side? ## -$smwgBrowseShowInverse = false; +$GLOBALS['smwgBrowseShowInverse'] = false; ## ### # Should the browse view always show the incoming links as well, and more of # the incoming values? ## -$smwgBrowseShowAll = true; +$GLOBALS['smwgBrowseShowAll'] = true; ## ### @@ -193,7 +193,7 @@ # are only a few results with the exact value? Switch this off if this page has # performance problems. ## -$smwgSearchByPropertyFuzzy = true; +$GLOBALS['smwgSearchByPropertyFuzzy'] = true; ## ### @@ -201,15 +201,15 @@ # Type, and Concept. If a value of 0 is given, the respective listings are # hidden completely. ## -$smwgTypePagingLimit = 200; // same number as for categories -$smwgConceptPagingLimit = 200; // same number as for categories -$smwgPropertyPagingLimit = 25; // use smaller value since property lists need more space +$GLOBALS['smwgTypePagingLimit'] = 200; // same number as for categories +$GLOBALS['smwgConceptPagingLimit'] = 200; // same number as for categories +$GLOBALS['smwgPropertyPagingLimit'] = 25; // use smaller value since property lists need more space ## ### # How many values should at most be displayed for a page on the Property page? ## -$smwgMaxPropertyValues = 3; // if large values are desired, consider reducing $smwgPropertyPagingLimit for better performance +$GLOBALS['smwgMaxPropertyValues'] = 3; // if large values are desired, consider reducing $smwgPropertyPagingLimit for better performance ## ### @@ -218,23 +218,23 @@ # to complex queries. The following settings affect all queries, wherever they # occur. ## -$smwgQEnabled = true; // (De)activates all query related features and interfaces -$smwgQMaxLimit = 10000; // Max number of results *ever* retrieved, even when using special query pages. -$smwgIgnoreQueryErrors = true; // Should queries be executed even if some errors were detected? +$GLOBALS['smwgQEnabled'] = true; // (De)activates all query related features and interfaces +$GLOBALS['smwgQMaxLimit'] = 10000; // Max number of results *ever* retrieved, even when using special query pages. +$GLOBALS['smwgIgnoreQueryErrors'] = true; // Should queries be executed even if some errors were detected? // A hint that points out errors is shown in any case. -$smwgQSubcategoryDepth = 10; // Restrict level of sub-category inclusion (steps within category hierarchy) -$smwgQSubpropertyDepth = 10; // Restrict level of sub-property inclusion (steps within property hierarchy) +$GLOBALS['smwgQSubcategoryDepth'] = 10; // Restrict level of sub-category inclusion (steps within category hierarchy) +$GLOBALS['smwgQSubpropertyDepth'] = 10; // Restrict level of sub-property inclusion (steps within property hierarchy) // (Use 0 to disable hierarchy-inferencing in queries) -$smwgQEqualitySupport = SMW_EQ_SOME; // Evaluate #redirects as equality between page names, with possible +$GLOBALS['smwgQEqualitySupport'] = SMW_EQ_SOME; // Evaluate #redirects as equality between page names, with possible // performance-relevant restrictions depending on the storage engine - // $smwgQEqualitySupport = SMW_EQ_FULL; // Evaluate #redirects as equality between page names in all cases - // $smwgQEqualitySupport = SMW_EQ_NONE; // Never evaluate #redirects as equality between page names + // $GLOBALS['smwgQEqualitySupport'] = SMW_EQ_FULL; // Evaluate #redirects as equality between page names in all cases + // $GLOBALS['smwgQEqualitySupport'] = SMW_EQ_NONE; // Never evaluate #redirects as equality between page names $smwgQSortingSupport = true; // (De)activate sorting of results. -$smwgQRandSortingSupport = true; // (De)activate random sorting of results. -$smwgQDefaultNamespaces = null; // Which namespaces should be searched by default? +$GLOBALS['smwgQRandSortingSupport'] = true; // (De)activate random sorting of results. +$GLOBALS['smwgQDefaultNamespaces'] = null; // Which namespaces should be searched by default? // (value NULL switches off default restrictions on searching -- this is faster) - // Example with namespaces: $smwgQDefaultNamespaces = array(NS_MAIN, NS_IMAGE); + // Example with namespaces: $GLOBALS['smwgQDefaultNamespaces'] = array(NS_MAIN, NS_IMAGE); /** * List of comparator characters supported by queries, separated by '|', for use in a regex. @@ -252,7 +252,7 @@ * * @var string */ -$smwgQComparators = '<|>|!~|!|~|≤|≥|<<|>>'; +$GLOBALS['smwgQComparators'] = '<|>|!~|!|~|≤|≥|<<|>>'; ### # Sets whether the > and < comparators should be strict or not. If they are strict, @@ -267,23 +267,23 @@ # queries that should immediately be answered by the wiki, using whatever # computations are needed. ## -$smwgQMaxSize = 12; // Maximal number of conditions in queries, use format=debug for example sizes -$smwgQMaxDepth = 4; // Maximal property depth of queries, e.g. [[rel::<q>[[rel2::Test]]</q>]] has depth 2 +$GLOBALS['smwgQMaxSize'] = 12; // Maximal number of conditions in queries, use format=debug for example sizes +$GLOBALS['smwgQMaxDepth'] = 4; // Maximal property depth of queries, e.g. [[rel::<q>[[rel2::Test]]</q>]] has depth 2 // The below setting defines which query features should be available by default. // Examples: -// only cateory intersections: $smwgQFeatures = SMW_CATEGORY_QUERY | SMW_CONJUNCTION_QUERY; -// only single concepts: $smwgQFeatures = SMW_CONCEPT_QUERY; -// anything but disjunctions: $smwgQFeatures = SMW_ANY_QUERY & ~SMW_DISJUNCTION_QUERY; +// only cateory intersections: $GLOBALS['smwgQFeatures'] = SMW_CATEGORY_QUERY | SMW_CONJUNCTION_QUERY; +// only single concepts: $GLOBALS['smwgQFeatures'] = SMW_CONCEPT_QUERY; +// anything but disjunctions: $GLOBALS['smwgQFeatures'] = SMW_ANY_QUERY & ~SMW_DISJUNCTION_QUERY; // The default is to support all basic features. -$smwgQFeatures = SMW_PROPERTY_QUERY | SMW_CATEGORY_QUERY | SMW_CONCEPT_QUERY | +$GLOBALS['smwgQFeatures'] = SMW_PROPERTY_QUERY | SMW_CATEGORY_QUERY | SMW_CONCEPT_QUERY | SMW_NAMESPACE_QUERY | SMW_CONJUNCTION_QUERY | SMW_DISJUNCTION_QUERY; ### Settings about printout of (especially inline) queries: -$smwgQDefaultLimit = 50; // Default number of rows returned in a query. Can be increased with limit=num in #ask -$smwgQMaxInlineLimit = 500; // Max number of rows ever printed in a single inline query on a single page. +$GLOBALS['smwgQDefaultLimit'] = 50; // Default number of rows returned in a query. Can be increased with limit=num in #ask +$GLOBALS['smwgQMaxInlineLimit'] = 500; // Max number of rows ever printed in a single inline query on a single page. $smwgQPrintoutLimit = 100; // Max number of supported printouts (added columns in result table, ?-statements) -$smwgQDefaultLinking = 'all'; // Default linking behavior. Can be one of "none", "subject" (first column), "all". +$GLOBALS['smwgQDefaultLinking'] = 'all'; // Default linking behavior. Can be one of "none", "subject" (first column), "all". ### @@ -298,22 +298,22 @@ # complex queries responably. Other users can employ thus defined concepts in # their queries. ## -$smwgQConceptCaching = CONCEPT_CACHE_HARD; // Which concepts should be displayed only if available from cache? +$GLOBALS['smwgQConceptCaching'] = CONCEPT_CACHE_HARD; // Which concepts should be displayed only if available from cache? // CONCEPT_CACHE_ALL -- show concept elements anywhere only if they are cached // CONCEPT_CACHE_HARD -- show without cache if concept is not harder than permitted inline queries // CONCEPT_CACHE_NONE -- show all concepts even without any cache // In any cases, caches will always be used if available. -$smwgQConceptMaxSize = 20; // Same as $smwgQMaxSize, but for concepts -$smwgQConceptMaxDepth = 8; // Same as $smwgQMaxDepth, but for concepts +$GLOBALS['smwgQConceptMaxSize'] = 20; // Same as $smwgQMaxSize, but for concepts +$GLOBALS['smwgQConceptMaxDepth'] = 8; // Same as $smwgQMaxDepth, but for concepts // Same as $smwgQFeatures but for concepts (note: using concepts in concepts is currently not supported!) -$smwgQConceptFeatures = SMW_PROPERTY_QUERY | SMW_CATEGORY_QUERY | SMW_NAMESPACE_QUERY | +$GLOBALS['smwgQConceptFeatures'] = SMW_PROPERTY_QUERY | SMW_CATEGORY_QUERY | SMW_NAMESPACE_QUERY | SMW_CONJUNCTION_QUERY | SMW_DISJUNCTION_QUERY; // Cache life time in minutes. If a concept cache exists but is older than // this, SMW tries to recompute it, and will only use the cache if this is not // allowed due to settings above: -$smwgQConceptCacheLifetime = 24 * 60; +$GLOBALS['smwgQConceptCacheLifetime'] = 24 * 60; ### Predefined result formats for queries @@ -324,7 +324,7 @@ # formats 'table' and 'list' are defaults that cannot be disabled. The format # 'broadtable' should not be disabled either in order not to break Special:ask. ## -$smwgResultFormats = array( +$GLOBALS['smwgResultFormats'] = array( 'table' => 'SMW\TableResultPrinter', 'list' => 'SMW\ListResultPrinter', 'ol' => 'SMW\ListResultPrinter', @@ -349,7 +349,7 @@ # To disable an alias, do "unset($smwgResultAliases['alias']);" Disabled # aliases will be treated like if the alias parameter had been omitted. ## -$smwgResultAliases = array( 'feed' => array( 'rss' ) ); +$GLOBALS['smwgResultAliases'] = array( 'feed' => array( 'rss' ) ); ## ### Predefined sources for queries @@ -360,7 +360,7 @@ # the local source (which in turn cannot be disabled or set explicitly). # Set a new store like this: $smwgQuerySources['freebase'] = "SMWFreebaseStore"; ## -$smwgQuerySources = array( +$GLOBALS['smwgQuerySources'] = array( // 'local' => '', ); ## @@ -371,16 +371,16 @@ # See the file languages/SMW_LanguageXX.php to find what IDs to use for # datatpyes in your language. The default corresponds to "Type:Page". ## -$smwgPDefaultType = '_wpg'; +$GLOBALS['smwgPDefaultType'] = '_wpg'; ## ### # Settings for OWL/RDF export ## -$smwgAllowRecursiveExport = false; // can normal users request recursive export? -$smwgExportBacklinks = true; // should backlinks be included by default? +$GLOBALS['smwgAllowRecursiveExport'] = false; // can normal users request recursive export? +$GLOBALS['smwgExportBacklinks'] = true; // should backlinks be included by default? // global $smwgNamespace; // The Namespace of exported URIs. -// $smwgNamespace = "http://example.org/id/";; // Will be set automatically if +// $GLOBALS['smwgNamespace'] = "http://example.org/id/";; // Will be set automatically if // nothing is given, but in order to make pretty URIs you will need to set this // to something nice and adapt your Apache configuration appropriately. This is // done, e.g., on semanticweb.org, where URIs are of the form @@ -392,7 +392,7 @@ # notation. The deafult is rather large since some users have problems understanding # exponents. Scineitfic applications may prefer a smaller value for concise display. ## -$smwgMaxNonExpNumber = 1000000000000000; +$GLOBALS['smwgMaxNonExpNumber'] = 1000000000000000; ## ### @@ -405,7 +405,7 @@ # parts of the semantic data to get out of date, so that manual modifications # or the use of SMW_refreshData.php might be needed. ## -$smwgEnableUpdateJobs = true; +$GLOBALS['smwgEnableUpdateJobs'] = true; ## ### @@ -418,7 +418,7 @@ # during full RDF export, unless they are referred to from another # article. ## -$smwgNamespacesWithSemanticLinks = array( +$GLOBALS['smwgNamespacesWithSemanticLinks'] = array( NS_MAIN => true, NS_TALK => false, NS_USER => true, @@ -451,11 +451,11 @@ # Or: # array_merge( $smwgPageSpecialProperties, array( '_CDAT' ) ); # Or rewrite entire array: -# $smwgPageSpecialProperties = array( '_MDAT', '_CDAT' ); +# $GLOBALS['smwgPageSpecialProperties'] = array( '_MDAT', '_CDAT' ); # However, DO NOT use `+=' operator! This DOES NOT work: # $smwgPageSpecialProperties += array( '_MDAT' ); ## -$smwgPageSpecialProperties = array( '_MDAT' ); +$GLOBALS['smwgPageSpecialProperties'] = array( '_MDAT' ); ### # Properties (usually given as internal ids or DB key versions of property @@ -466,7 +466,7 @@ # setting is not normally changed by users but by extensions that add new # types that have their own additional declaration properties. ## -$smwgDeclarationProperties = array( '_PVAL', '_LIST' ); +$GLOBALS['smwgDeclarationProperties'] = array( '_PVAL', '_LIST' ); ## // some default settings which usually need no modification @@ -476,7 +476,7 @@ # Setting this to true allows to translate all the labels within # the browser GIVEN that they have interwiki links. ## -$smwgTranslate = false; +$GLOBALS['smwgTranslate'] = false; ### # -- FEATURE IS DISABLED -- @@ -489,29 +489,29 @@ # highly experimental at the moment, and may not do what you # extect. ## -// $smwgRAPPath = $smwgIP . 'libs/rdfapi-php'; -// $smwgRAPPath = '/another/example/path/rdfapi-php'; +// $GLOBALS['smwgRAPPath'] = $smwgIP . 'libs/rdfapi-php'; +// $GLOBALS['smwgRAPPath'] = '/another/example/path/rdfapi-php'; ## ### # If the following is set to true, it is possible to initiate the repairing # or updating of all wiki data using the interface on Special:SMWAdmin. ## -$smwgAdminRefreshStore = true; +$GLOBALS['smwgAdminRefreshStore'] = true; ## ### # Sets whether or not the 'printouts' textarea should have autocompletion # on property names. ## -$smwgAutocompleteInSpecialAsk = true; +$GLOBALS['smwgAutocompleteInSpecialAsk'] = true; ## ### # Sets whether or not to refresh the pages of which semantic data is stored. # Introduced in SMW 1.5.6 ## -$smwgAutoRefreshSubject = true; +$GLOBALS['smwgAutoRefreshSubject'] = true; ## ### @@ -522,7 +522,7 @@ # # @since 1.9 ## -$smwgCacheType = CACHE_ANYTHING; +$GLOBALS['smwgCacheType'] = CACHE_ANYTHING; ## ### @@ -543,7 +543,7 @@ # # @since 1.9 ## -$smwgCacheUsage = array( +$GLOBALS['smwgCacheUsage'] = array( 'smwgWantedPropertiesCache' => true, 'smwgWantedPropertiesCacheExpiry' => 3600, 'smwgUnusedPropertiesCache' => true, @@ -563,7 +563,7 @@ # @requires $smwgCacheType be set # @default true ## -$smwgAutoRefreshOnPurge = true; +$GLOBALS['smwgAutoRefreshOnPurge'] = true; ## ### @@ -575,7 +575,7 @@ # @requires $smwgCacheType be set # @default true ## -$smwgAutoRefreshOnPageMove = true; +$GLOBALS['smwgAutoRefreshOnPageMove'] = true; ## ## @@ -603,7 +603,7 @@ # # Example: If you have a property named 'Age' which is of type 'Number' then add in LocalSettings: # -# $smwgFixedProperties = array( +# $GLOBALS['smwgFixedProperties'] = array( # 'Age' => SMWDataItem::TYPE_NUMBER # ); # @@ -613,7 +613,7 @@ # # @var array ## -$smwgFixedProperties = array(); +$GLOBALS['smwgFixedProperties'] = array(); ### # Sets a threshold value for when a property is being highlighted as "hardly @@ -623,7 +623,7 @@ # # default = 5 ## -$smwgPropertyLowUsageThreshold = 5; +$GLOBALS['smwgPropertyLowUsageThreshold'] = 5; ## ### @@ -633,7 +633,7 @@ # # default = true (legacy behaviour) ## -$smwgPropertyZeroCountDisplay = true; +$GLOBALS['smwgPropertyZeroCountDisplay'] = true; ### # Sets whether or not a factbox content should be stored in cache. This will @@ -649,7 +649,7 @@ # @requires $smwgCacheType be set # @default true ## -$smwgFactboxUseCache = true; +$GLOBALS['smwgFactboxUseCache'] = true; ## ### @@ -665,7 +665,7 @@ # @requires $smwgCacheType be set # @default true ## -$smwgFactboxCacheRefreshOnPurge = true; +$GLOBALS['smwgFactboxCacheRefreshOnPurge'] = true; ## ### @@ -677,5 +677,5 @@ # # @since 1.9 ## -$smwgDeferredPropertyUpdate = false; +$GLOBALS['smwgDeferredPropertyUpdate'] = false; ## -- To view, visit https://gerrit.wikimedia.org/r/92610 To unsubscribe, visit https://gerrit.wikimedia.org/r/settings Gerrit-MessageType: merged Gerrit-Change-Id: I2a268227b9c63d717a4059f31be5e23ab6e3a454 Gerrit-PatchSet: 1 Gerrit-Project: mediawiki/extensions/SemanticMediaWiki Gerrit-Branch: master Gerrit-Owner: Jeroen De Dauw <[email protected]> Gerrit-Reviewer: Mwjames <[email protected]> Gerrit-Reviewer: jenkins-bot _______________________________________________ MediaWiki-commits mailing list [email protected] https://lists.wikimedia.org/mailman/listinfo/mediawiki-commits
