All messages should be posted in plain text. HTML will be converted to attachments. The meditech-l web site is MTUsers.com ======================================
Hi L'ers, We have set up a JJWild 1066i label printer with a 2.5" label stock. When a label is printed it prints from the far right side of the printer, but since the label is housed in the center of the feed, a portion of the label is cut off. Has anyone used a smaller label width in these JJWild printers and able to set the label width? I don't want to adjust the reports to push out spaces because we have existing datamax printers which do not require it. Dave Pearce Programmer / Analyst River Valley Health Ph. (506) 452-5984 -------------RVH DISCLAIMER------------- This electronic transmission and any accompanying attachments may contain privileged or confidential information intended only for the use of the individual or organization named above. Any action related with this communication as well as any reproduction, transmission and/or dissemination in whole or in part is strictly prohibited. If you have received this communication in error please notify the sender and delete this email immediately. Thank you. Ce message électronique et tout fichier qui y est joint pourraient contenir des renseignements privilégiés ou confidentiels destinés uniquement à la personne ou à l'organisme nommé ci-dessus. Toute action entreprise relativement à ce message ainsi que toute reproduction, transmission ou diffusion partielle ou totale de celui-ci sont strictement défendues. Si vous avez reçu ce message électronique par erreur, veuillez en informer l'expéditeur et détruire le message immédiatement. Merci. _______________________________________________ meditech-l mailing list [email protected] http://mtusers.com/mailman/listinfo/meditech-l
