Well, I have some good news (and hopefully my last post on the topic).
After many tedious and excruiating hours of testing, I think I have found the
settings that will work. The keys to getting this to work are:
1. First, finding the CPI settings that will allow ALL characters on the line
to print.
2. Then, finding the proper horizontal edge-to-edge setting that aligns the
form correctly.
By no means is the form perfect. Unlike Meditech's programming for the UB92,
which they did a very good job on and is almost flawless, Meditech's
programming of the UB04 has left a lot to be desired; in fact, I would be
embarrassed to send this form out to payers with the way that some of the
fields are lined-up within the blocks. But it DOES print all of the
characters, and for the most part, the characters that don't fit nicely within
the blocks are probably not critical data fields.
Here are the settings that I have found work the best:
ELF:
CPI: 10.12 (this is the key; it is the smallest value that allows all
characters on the line to print)
Left Margin: 0.20
LPI: 6
Top Margin: 0.095
HP 4250 Printer Quality:
X1: -4
Y: 0
Good luck, everyone.
Gary J. Ring
Strategic Resource Group, Inc.
11 Jones Road, Peabody, MA 01960
978-807-1573=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET.
To check the status of the meditech-l, visit MTUsers.NET.
For help, email [EMAIL PROTECTED]
Visit the MTUsers WikiPedia at MTUsers.NET/mwiki
______________________________________
meditech-l mailing list
[email protected]
http://mtusers.com/mailman/listinfo/meditech-l
