Hello, I also took a deeper look of test report having boundary values as example. I noticed that after opening link http://qa-reports.meego.com/1.2/Handset/Key%20basic%20feature/Ncdk/435 and checking Test Results by Feature from CoreUX side that it has 12 TC's pass out from 17 TC's. In practice TC Pass Rate seems to be 12/17 = 70.6%, grading for this is green. If I understood correctly grading should be green after Pass Rate is over 90%, right?
Br, Petri From: [email protected] [mailto:[email protected]] On Behalf Of Koski Petri (Nokia-MS/Tampere) Sent: 28. joulukuuta 2010 07:48 To: [email protected]; [email protected] Subject: Re: [Meego-qa] The grading and comments are available for each feature on qa-reports now Hello, Is this grading itself and its boundary values explained somewhere in the test report itself? "Here is a example of the 2 features. http://qa-reports.meego.com/1.2/Handset/Key%20basic%20feature/Ncdk/435 " Br, Petri From: [email protected] [mailto:[email protected]] On Behalf Of ext Tang, Shaofeng Sent: 28. joulukuuta 2010 03:32 To: [email protected] Subject: [Meego-qa] The grading and comments are available for each feature on qa-reports now Hi, On http://qa-reports.meego.com, 2 new features "Feature Grading" and "Feature comments" are available now. For helping readers get a clear status from feature summary, a brief comment could be added on each feature/test-set to briefly describe its' status. And also a grading will express the status in color. If you commit a new report, the grading will be calculated automatically according to below rules Grading Pass Rate of Total < 40% > 40%, < 90% > 90% And also the grading is editable for some high-weight fail/pass after the report is committed. Here is a example of the 2 features. http://qa-reports.meego.com/1.2/Handset/Key%20basic%20feature/Ncdk/435 Hope the two features are useful to you. Best Regards Shao-Feng
_______________________________________________ MeeGo-qa mailing list [email protected] http://lists.meego.com/listinfo/meego-qa
