> Do any of the Meep example files work on your machine? e.g. try > examples/ring.ctl
All the files in the examples directory run fine, except bend-flux.ctl.
It complains about an error in opening an HDF5 file.
--------------------- begin output ------------------
HDF5-DIAG: Error detected in HDF5 library version: 1.6.5 thread 0. Back
trace follows.
#000: H5F.c line 2048 in H5Fopen(): unable to open file
major(04): File interface
minor(17): Unable to open file
-------------------- output truncated ---------------
I'm guessing it's something to do with h5utils and not the core of meep.
I'll look at that later.
The file attached gave me the error I reported earlier (meep: Cannot
split -638795776 grid points into 1 parts). The pastebin link may have
gone to the older code with the low resolution (which runs fine here too
but gives the wrong result due to insufficient resolution).
Thanks.
Ashifi.
Steven G. Johnson wrote:
> On Mon, 13 Nov 2006, Ashifi wrote:
>> Thanks for the feedback Steven. I tried a few things over the weekend.
>>
>> Resolution = 1e8 should give me 1e8 pixels per meter, or 1 pixel = 1e-8
>> meters which would sufficiently resolve the 18 micron thick copper plate.
>>
>> Setting the resolution to 1e8 gives the error:
>> meep: Cannot split -638795776 grid points into 1 parts
>
> I can't replicate your problem. I tried your input file on my machine
> and it ran successfully in about 2 seconds.
>
> Do any of the Meep example files work on your machine? e.g. try
> examples/ring.ctl
>
> _______________________________________________
> meep-discuss mailing list
> [email protected]
> http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss
>
pcb-polished-fixed.ctl
Description: application/extension-ctl
_______________________________________________ meep-discuss mailing list [email protected] http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss
