Hi, everyone,
When I run the ring.ctl in examples folder, there is an error (see below).
=================================================================
Initializing structure...
Working in 2D dimensions.
Computational cell is 16 x 16 x 0 with resolution 10
cylinder, center = (0,0,0)
radius 2, height 1e+20, axis (0, 0, 1)
dielectric constant epsilon diagonal = (11.56,11.56,11.56)
cylinder, center = (0,0,0)
radius 1, height 1e+20, axis (0, 0, 1)
dielectric constant epsilon diagonal = (1,1,1)
Halving computational cell along direction y
time for set_epsilon = 0.15632 s
-----------
creating output file "./ring-eps-000000.00.h5"...
Meep progress: 328.1/400.0 = 82.0% done in 4.0s, 0.9s to go
on time step 6577 (time=328.85), 0.000608291 s/step
harminv0:, frequency, imag. freq., Q, |amp|, amplitude, error
meep: compiled without Harminv library, required for do_harminv
==================================================================
What's wrong? I have installed the harminv software. Meep can not find
harminv library?
Best regards,
Liu Yan
_______________________________________________
meep-discuss mailing list
[email protected]
http://ab-initio.mit.edu/cgi-bin/mailman/listinfo/meep-discuss
