I became the proud owner of a set of B45 simmons rims this week 15X7's Silver inner polished outer. They were made for another 1600 track car but were never used. They are brand new as far as I can tell they stil have all the stickers on the RIMS. Fit perfectly paid $1100 for them. I went to a wheel place and they told me that simmons are about the only aftermarket wheel that you can get because of the offset. 16's polsihed were $620 each and 17's $730. Considering that these are specifically made for your car would be nice but very expensive. Anyway I think I scored just need some tyres :-> Good Luck Ryan >From: "Zac Campbell" <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >To: <[EMAIL PROTECTED]> >Subject: Re: rims >Date: Fri, 17 Mar 2000 16:09:04 +1030 > >I reckon it is very much a hit and miss affair. 15s are big enough for a >1600, I reckon. The best bet is to find some rims you like and test them. >It >would be impossible to list every rim that will fit a 1600 with every >different strut combo. >I imagine you are in the market for second hand rims, as most wheel >manufacturers may be able to custom build the wheels for you if you are >buying them new. >If you are after factory wheels to fit your 16, then RWD Nissan is the >first >place to look, followed my early rwd mitsus and some toyota. >Remember for 15" wheels you will need 50 series tyres, no question, no >buts. > >If you find some wheels you like, try them on before you buy! >If the seller won't let you try them on, tell him to go shove it. >I also think that when you get to 15" size widths are arond 6.5" or wider. > >good luck! >zac > >----- Original Message ----- >From: Chris Halpin <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Saturday, March 18, 2000 2:29 AM >Subject: rims > > > > Does anyone have a list of the 15" rims that can fit under a datto 1600 >with > > either stock or 240K struts, ie, ones that you don't need spacer plates >for > > or flare kits? I don't want particularly wide wheels (195's are fine >for > > me), and wish the rim to be no higher than 15", and no wider than 6". >Do > > TRX rims have the correct offset to bolt straight onto the strut? What >are > > some rims that are this size, the correct offset, and look real nice on >a > > datto, that aren't that expensive, and are reasonably easy to find? > > > > Thanks anyone who can help my datto look less granny!!! > > > > Chris - [EMAIL PROTECTED] > > ______________________________________________________ > > Get Your Private, Free Email at http://www.hotmail.com > > > > > ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html ---------------------------------------------------------------------
