Most of em are easy to fit but take a bit of time. The idler arm will be a
bitch to get off.
And yes you should get the front end aligned after you fit em..
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Diarmuid Tyson
Sent: Wednesday, March 22, 2000 1:11 PM
To: [EMAIL PROTECTED]
Subject: Front end parts
Hey all. The Datto was starting to feel a little nervous under brakes,
with more than normal movement in the steering wheel, so I went and got the
front alignment done. The alignment helped, but they pointed out a few
more things that need attention in the front end. Apparently the radius
rod and sway bar bushes all need replacing along with the idler arm. When
I asked if they could replace them, they said they'd have trouble getting
parts for such an old car. If I went and got the parts they said they'd be
happy to do it.
Question is, does anyone know where I can get this stuff? There is a
Repco on the way to work that I can drop in at.
Would I be able to fit them myself? Or will everything have to be
professionally aligned afterwards anyway.
Thanks,
D.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
