Re: L18 EFI - Message for Peter Parry

[Peter Parry]

  Michael  most 610's SSS 's with wrap around blinkers 1974 on have a 6/8 pin plug hanging under the wiper motor  if you loook in that general area you should find it . I cant remember if it was 6 or 8 pin but its white. Apparently all SSS's late models were available in Japan as SSS-E the E signifing efi some boot lids off em still have this badge on them . asit was back in early 80's when we did these conversions my memory isnt as good as it should be. I do recall that apart from pluging ECU loom into plug under wiper I only had to run a wire to fuel pump as I could not find that wire but it probably is in there .
Peter

Foreshew, Michael, HiServ/AU wrote:

 

Peter,

I was reading one of your earlier posts in regards to EFI for the L18.  In it you mention that there is the ECU plug under the wiper motor in the engine bay.  Does this apply to 610's?  I was trying to find it whilst doing the Bluebird dizzy install but couldn't seem to find it.  What does it look like?

Cheers

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------

--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------