where did you get them?
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, April 05, 2000 2:37 PM
To: [EMAIL PROTECTED]
Subject: Re:
Yes the 280ZX struts are very short.
I just fitted a set to my 1600.
The struts I have are vented discs of about 10 1/2 inch diameter with
massive single piston callipers.
I grafted 1600 spring seats about 25mm lower on the strut, as the 280ZX
spring platforms are too wide. I used pedders gas inserts and standard
1600 springs, and narrowwed 280zx strut tops, ie: ground down diameter to
fit into strut tower of 1600.
The car is quite low and has excellent suspension travel.
It ended up being legal height, ie:600mm ground to centre of headlight.
I hope this helps you,
Graeme.
"CP" <[EMAIL PROTECTED]>
Sent by: To:
<[EMAIL PROTECTED]>
membersozdat_owner@datascr cc:
ibe.com.au Subject:
06/04/2000 01:29 AM
Please respond to
membersozdat
Does any one have a spare set of 280zx struts and brakes they wish to part
with?
In meblourne prefurably.
Also are these a short strut with vented discs and big calipers????
Chris
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
