the 280zx in bayswater pick a part is gone I was there last weekend
CP wrote:
> ta still finding info on if they fit or not
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Pooley, Trevor
> Sent: Friday, April 07, 2000 12:30 PM
> To: '[EMAIL PROTECTED]'
> Subject: 280zx struts
>
> Chris,
>
> There is a 280ZX at pick a part with front struts a few weeks back.
>
> Trev
>
> Date: Thu, 6 Apr 2000 03:18:07 +1000
> From: "CP" <[EMAIL PROTECTED]>
> ----------------------------------------
> where did you get them?
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of
> [EMAIL PROTECTED]
> Sent: Wednesday, April 05, 2000 2:37 PM
> To: [EMAIL PROTECTED]
> Subject: Re:
>
> Yes the 280ZX struts are very short.
> I just fitted a set to my 1600.
> The struts I have are vented discs of about 10 1/2 inch diameter with
> massive single piston callipers.
> I grafted 1600 spring seats about 25mm lower on the strut, as the 280ZX
> spring platforms are too wide. I used pedders gas inserts and standard
> 1600 springs, and narrowwed 280zx strut tops, ie: ground down diameter to
> fit into strut tower of 1600.
> The car is quite low and has excellent suspension travel.
> It ended up being legal height, ie:600mm ground to centre of headlight.
>
> I hope this helps you,
> Graeme.
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
