|
Terry, Richard Clough came up with a good combination. I hadn’t thought to disconnect the
inner normal high beams for an event.
I had just assumed that they were there so needed to be connected. I follow that up with CAMS. I had aircraft landers as high beam inserts. 500W each. They were absolutely bloody unreal but
forget about trying have the radio on or windscreen wipers or radio or anything
else electrical. I was told they
were illegal because the lenses were plain glass whereas the glass needs to be
moulded/etched with diffusers to spread the light. Whatever, they were good but took about 4 seconds to warm
up. A very interesting sensation
whilst driving at 100kmph and having no lights for 4 seconds. Cheers -----Original
Message----- Michael, I then progressed to cibie inserts for all
four headlights (2x 80/100w and 2 x 100w) and most of the time just by
disabling the inners for dirt work was the accepted practice with 4 x oscars on
the bar, the other option was to remove the inner inserts for competition but i
can only recall having to do this once at the Alpine event around Wang/Mt
Beauty in Victoria (fussy sobs). The other well used system was to have only 2
super oscars on the bar mounted high which i have been behind and there OK too,
you can see for miles but the spread is not any where as good as the spot/flood
oscar combos (imho) plus if you lost one (rare) you loose a lot more light. We
wired the inserts the well proven way for the street (Fergy7 followed the
wiring diagram and has done it on his resto recently); it was simple to
disable the inners and activate the oscars as we fitted a dual pole switch on
the sense wire from the dip switch and the second bank of relays were alive -
pretty simple and reliable system. As for alternators, i saw a few set-ups
years ago that were quite innovative, one that comes to mind was on a
"083" works backed (FIA Group G) 610 SSS (driver Warwick ???? i
had the pleasure of some very scary rides with him) that had 2 x 55 amp Bosch
alternators. The second alternator bracket was mounted to the block using the
a/cond holes on the passenger side and the alt run off an a/c pulley and
adjuster - I don't know whether it's legal these days but they reckoned it
worked well. regards "Foreshew, Michael, HiServ/AU"
wrote: Terry,
--membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html --------------------------------------------------------------------- |
