> What size is the factory front sway bar on a 1970 510 ?
Mine's a '70 wagon - 19mm is the figure I recall, but may be 18.
A $5 plastic vernier caliper will be easily accurate enough to tell what size
it is, or clamp a G-clamp to it, back it off so that you can remove the clamp
from the bar then measure across the jaws. 18 or 22mm should be easy to tell
apart.
> Also, Is it safe\possible to change these bushes (and the radius rod bushes)
without jacking the car up? as I don't have a garage to work in at the moment...
Safe ? Perfectly, no chance of a jack giving way on you.
Possible ? I think it should be possible to remove and install both swaybar
and radius rods without jacking it up - and you have to torque up all the bolts
with the car on the ground anyway. Might be a pain if your car is really dumped.
Good luck,
DF
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
