Bruce, I have 240K front struts with sumitomo twin spots, torana radius rods, 14x5.5 wheels and datrally lower control arms on my 1600. No problems with turning circle, although 2.8deg pos caster causes the front wheel to just touch the lower front wheel arch at near full lock. Trev -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Topic: == Date: Tue, 16 May 2000 23:00:25 +1000 From: "Richard Clough" <[EMAIL PROTECTED]> ---------------------------------------- These twin piston calipers come of 240K coupes and 240Z cars, so they fit 240 K calipers ----- Original Message ----- From: bruce ferguson <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, 16 May 2000 11:16 AM Subject: Sumitomo Calipers for a 1600 ??? > 510'ers > > I have the opportunity of purchasing a set of twin > spot Sumitomo Calipers. > > Not having heard anyone discuss this as an option for > a 1600, I have a couple of questions. > > I am led to beleive that they are a direct bolt on to > 240K struts. ?? > > Not knowing how large these units are, I may have > difficulty in getting a full turning circle due to the > fact that I also have a pair of Torana radius rods > fitted ??? A set of Skyline calipers I fitted fouled > the rods so that was a non event. > > Any experiences out there ?? I know they will fit a > 200B with 240K stuts, but the 1600 may be a different > matter. > > Thnaks in advance > > Cheers > > Bruce > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
