Re: snapped stud

[Davo]

I had an identicle problem today.  I snaped a stud on a Laser TX3 turbo.  There was enough of the stud left to weld another bolt onto it and it came out easy.  But this doesnt always work, i happened to be lucky.  Otherwise, out comes the drill and drill the c*nt out and re-tap the thread to a larger size.  I dont know if any of this will help, but i would recomend taking it somewhere that has the tools.   Davo -----Original Message----- From: Andrew Peters <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Monday, 22 May 2000 6:44 Subject: snapped stud hi all, after pulling the motor out today (z18), i attempted to remove the exhaust dump pipe from the turbo, in doing so i managed to snap one of the studs that go into the rear housing. just wondering what the go is with pulling the old one out (there is enough of it to grip), can i do it, or is it best left to someone with some tools and know how? thanks andrew --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------