Terry, When you say the Bosch unit do you mean the electronic series 2 b'bird Hi energy type? If so I think I will give it a go. Trev =-=-=-=-==-=-=-=- Topic: Vacuum advance ================ Date: Tue, 30 May 2000 23:39:25 +1000 From: Terry & Heather <[EMAIL PROTECTED]> ---------------------------------------- Craig, I take it you are running a single carb on the x-over mani - if so you don't need the vac advance but block off the connection on the dizzy with a bung and set you're initial advance a bit higher than stock. Somewhere between 12 - 14 degrees depending on which dizzy you've got. The SSS Hitachi is the preferred points type, if it's a Bosch then you may have to run around 10 - 12 degrees. Terry Craig Harris wrote: > Just got my carby tuned and the dude reckons that you dont need vac advance > or it doesnt work when using delorto on a lynx mani because it is to pulsy > and just jumps the advance around too much, > > any one on the list still using it?? > > also what is involved with regraphing? > > craig --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
