I forgot to say the standard CA18det injectors are good for 280hp 15psi with
a few mods they are 350cc. The toyota ones are good for 350hp or 430cc.getting
close to full duty cycle now with my CA18det mind you its on a dose of steroids
500cc a min ute is equivalent to 100hp per injector. Go here to find out some
flow rates ect http://www.aems.com.au/injector_flow_rates.htm
Cheers Andrew
Andrew Denniss wrote:
> Sounds not right to me. I know the Supra 7mg or MR2 3gte injectors fit also
> the mitsubishi VR4 the sr20 turbo one's look very similar I dont think the
> FJ20 injectors are same design plus the stock ecu would not recalibrate for
> different flow I had to lean mine of %16 to get it to run right with the
> supra injectors make sure they are same length and as same resistance low
> ohm 4-8. Better of talking to someone who waork on them and does mods Domand
> Tony rigoli in sydney work on them give them a buzz.
> Cheers Andrew
>
> Chris Adams wrote:
>
> > Hi all,
> >
> > This guy at a jap import place told me that FJ20 injectors bold straight
> > into a CA18 and that the computer recognises or resets itself to suit.
> > Does anyone know if this is correct??
> >
> > Thanks
> >
> > Chris.
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
