We can make up custom made extractors at my work. We have done it to alot
of cars but not an SR since i've been there. Im sure my boss could do it as
he's been in the trade for 14 years. He's a really good welder and knows
his pipes. If you want to contact us Goto www.hitechmufflers.com.au . or
give us a ring on (02) 95695888. Were in Sydney but we do send alot of
stuff interstate.
Wouldnt mind a SR powered 1200. An A15 if all i need for now :-)
Scott
Davo
-----Original Message-----
From: Errol Smith <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Thursday, 3 August 2000 9:59
Subject: Re: SR20 in Darwin
>Kevin,
>Have a look at my website www.datrats.com.au (IP adress 203.33.35.35) for
>some stuff. I can get cams done on an exchange basis, Aluminium 2110-76
>billet flywheels with Bisalloy inserts, multi plate light clutch
>assemblies. I dont have any exhaust stuff for SR's though you would
>probably be better of using a good exhaust place to make a custom set of 4
>-2 -1 extractors from 1 3/4" primary pipes using an SR exhaust gasket as a
>template to cut a manifold piece from 8 mm M/Steel. Mail me if you want to
>pick my limited info.
>Cheers
>Feral Errol
>
>----------
>From: KFZ <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: SR20 in Darwin
>Date: Thursday, August 03, 2000 8:46
>
>
>
>Hi All,
>
>
>does anybody have any bits to help my 1200 coupe powered SR20 go a bit
>harder.
>
>
>I use it for club car racing. I have a engine and gearbox and nothing else.
>
>
>Eg which computer to use, cams exhaust, clutch, lighten flywheel etc
>
>
>Or a contact will help
>
>
>We have removed the L18 for the SR20.
>
>
>Kevin
>
>-----------------------------------------------------------------------
>
>
>
> ("`-''-/").___..--''"`-._
>
> `<bold>6_ 6 </bold> ) `-. ( ).`-.__.`)
>
> (_Y_.)' ._ ) `._ `. ``-..-'
>
> _..`--'_..-_/ /--'_.' ,'
>
> (il).-'' (li).' ((!.-'
>
>
>
>
>
>Fiona, Zack and Kevin
>
>
>Email: [EMAIL PROTECTED]
>
> or
>
>Email: [EMAIL PROTECTED]
>
>Work 08 8932 5544
>
>Fax 08 8932 4371
>
>Mobile 0417 851 430
>
>PO Box 39370
>
>Winnellie
>
>NT 0821
>
>
>
>"It is a mistake to allow any mechanical object to realize you are in a
>hurry."
>
>
>--membersozdat-------------------------------------------------------
>
>OZDAT Mailing List Please Note:-
>
>Send (un)subscribe requests to [EMAIL PROTECTED]
>
>Send submissions to [EMAIL PROTECTED]
>
>No unauthorised redistribution of this email
>
>http://www.ozdat.com/ozdatonline/index.htm
>
>http://www.ozdat.com/ozdatonline/listindex.html
>
>http://www.mail-archive.com/[email protected]/
>
>---------------------------------------------------------------------
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
