Michael, Do'h, I just realised the subject and I've been pratting on about a H1 mod, but I'd still recommend you wire in the second relay. I've never had much trouble with 510 headlight relays other than crook connections in the later model plug in to the base of the relay type but the first time I fitted 100w a/c landers in the inners on my brand new '72 GL the switch lasted the first country trip and then it melted so I only had low beam until I could get another switch, better than nothing I spose. That's when I learnt about hot wired lighting on a 510, like I wired in a second relay for the inners the same way as I'd done on my 1200 and of course it didn't work. I've found that you can run 55/100w outer beams in the 510 but only if you wire in the second relay as per the instructions as even a pair of 50w sealed beam inners in conjunction with the high output outers will still fry the switch. With the 30amp Bosch second relay in you can run 55/100w outers and up to 130w inners with no dramas except for dickheads who flash you coming the other way when you return the favour. You may have to upgrade the big white wire from your alternator to starter motor solenoid as this original wire is rated at 35amp continuous. You only have to add a second wire that's rates at 35-40amp to get the best results, also I wouldn't run 4x100 high beam with less than a 60amp alternator. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Cassidy Sent: Saturday, 26 August 2000 3:23 AM To: [EMAIL PROTECTED] Subject: Re: H4's Thanx again terry, One question tho what is the max current you think the original relay can handle? I'm only runnin 55wx100 so i was thinking of runnin the lowbeams with the stock setup and using a relay for the high beams only... thanx Michael Terry & Heather wrote: > Michael, > > Have a read of the attachment and see if that's the info you're after. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Michael > Cassidy > Sent: Friday, 25 August 2000 4:06 PM > To: [EMAIL PROTECTED] > Subject: H4's > > Can anyone help me with wiring in some H4's? > > Thanx > > Michael > > > ------------------------------------------------------------------------ > > Part 1.2 Type: Microsoft MHTML Document 4.0 (message/rfc822) > Encoding: 7bit --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
