what engine you putting in your 1000?
I've got a 1000 coupe sitting around I might be putting a 351 Windsor into
and just using for drag racing
but it'd be a shame to cut up a car that as far as I've heard is fairly rare
I've looked into ways of getting some decent power outa it but there's too
much fabrication needed to fit any decent engines in there
I was gunna try an L16/8 but there's tonnes of mods needed to fit it and the
engine sits so low in the bay anyway that the sump would be smashing on
every speed bump and pot hole
Dave
-----Original Message-----
From: James & Chirryl <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Wednesday, 30 August 2000 5:17
Subject: Disk Brake conversion
>Gday List,
> I recently met a guy with a datsun 1000 coupe, It had been fitted with
>120y disks and sigma calipers. A mounting bracket had to be fabricated to
>hold the caliper in place. I'm very interested in getting a bracket like
>this made up. I don't have the skills or tools to make it myself, and it
>obviously has to be done properly, Because I plan to put some reasonable
>power into my 1000, and the drums just wont cut it. Can Anyone recommend
>someone around Sydney who is capable of such a task?
>Thanks,
>James.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
