Visiting a friend last night he was fixing a hub seal problem on an
80ish 4WD Landcruiser. I had a look at the calipers on it and they were
marked "S12+8". It uses solid discs. From memory these were the 4 spot
240K/Skyline 270mm disc strut bolt on item.  The calipers have to come
off I think and I will be visiting again on Wenesday when they do. If
anyone wants any info let me know, I plan to measure bolt spacing and
disc and offset if i can. I'll have a look at the manual to see what
models also have them.

Craig. 

max lamb wrote:
> 
> I just remembered the twin spots are from 4wd only, caliper no's PD60 and
> FS18 are both single piston 2wd. I don't have any numbers for the twin,
> sorry. If it means anything, hilux master cylinders have a 1' bore. The 2wd
> discs I mention in the last email are vented however.
> 
> 4wd disc's are 18mm - 20mm
> 2wd disc's are 23mm - 25mm
> 
> thankyou Gregorys
> 
> ----- Original Message -----
> From: Davidson <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, September 16, 2000 7:32 PM
> Subject: twin spot hunt...
> 
> > I've just been to the wrecker on the hunt for some hilux 2 spots.  I
> started
> > pulling some off a hilux and relized that they had solid disc's instead of
> > vented.  I couldnt find any larger hilux calipers!  I did however find a
> > landcrusier that were basically the same as the hilux calipers except they
> > were a bit wider because of the vented disc's.  I pulled them as they
> seemed
> > the better choice.
> >
> > Is there a hilux caliper on vented disc's???  Or was i looking for
> somthing
> > that doesnt exist?  Anyone else using these landcruiser calipers on stanza
> > struts??
> >
> > Now all i have to get is some god damn 10" vented disc's.  I've been told
> > the nissan maxima 11" vented disc's are a perfect fir for the stanza
> strut.
> > But there a 5 bolt stud pattern right.  Is there a way i can change 5 bolt
> > back to 4 bolts???
> >
> > Scott
> > Davo
> >
> >
> 


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to