Scott,
greatly appreciated. What L series engine have you used an 89mm bore on
out of interest? and how long did it last? I'm looking at using the Z22
which are 87mm stock bore with 88mm pistons if the gasket will allow.
Craig.
Scott wrote:
>
> Hi Craig
>
> A z24 head gasket is good on an L series if your bore size is 89mm. Its a
> cheap alternative to the competition type that usually have to be made to
> order. You have to punch a couple of extra holes in them to suit the L
> series. Can't remember which ones. Just use an Lseries one as a template. I
> have used them on a couple of engines without fail.
>
> Scott
> -----Original Message-----
> From: Craig Overend <[EMAIL PROTECTED]>
> To: OZDAT <[EMAIL PROTECTED]>;
> [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Sunday, 15 October 2000 13:56
> Subject: Z series head gaskets
>
> >Can anyone tell me whether Z22 and Z24 head gaskets will fit an L series
> >block/head without any modifications? Does anyone know the stock Z22/Z24
> >gasket
> >bore diameters aswell? What are peoples experience with L head gasket
> >brands, good and bad?
> >
> >Craig.
> >
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
