Does it come with a can of Trefolex?
Cheers
Feral Errol
----------
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: RE: Drilling holes...
Date: Wednesday, October 25, 2000 8:26
Anyone wanna buy a hole saw?
Used once!
-----Original Message-----
From: Errol Smith [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 25 October 2000 20:44
To: [EMAIL PROTECTED]
Subject: Re: Drilling holes...
Iggy,
Life is about learning I believe. I'm sure every other lister has made the
same or worse mistakes. The best part about this list is that I learn
something new every day.
Cheers
Feral Errol
-------
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: RE: Drilling holes...
Date: Wednesday, October 25, 2000 7:02
Just reading that I have done things all wrong..
1. Wood saw
2. Too fast
3. Too much pressure
Bugger...
-----Original Message-----
From: Errol Smith [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 25 October 2000 19:17
To: [EMAIL PROTECTED]
Subject: Re: Drilling holes...
Iggy,
I assume it is a metal cutting hole saw. If so the speed for a 2" saw
should only be about 400 rpm max. At higher speeds the teeth will burn Bye
Bye $50. A good cutting compound to use is "Trefolex". Also keep the
pressure on the saw light and let the teeth do the cutting, using the
minimum amount of weight needed to keep cutting.
Cheers
Feral Errol
----------
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Drilling holes...
Date: Wednesday, October 25, 2000 4:10
Hey guys,
Was trying to install my EFI loom today but am in a little bit of trouble..
I was drilling a lovely new hole for the firewall grommet. I was using a
hole saw with lots of Kero for lube. But now all I have is a blunt hole
saw,
a pretty shiny circle in my firewall, and a passenger footwell full of
kerosene. All I seem to generate is heat and smoke. Any of you guys done
this before? Am I drilling too fast? Help!!!
Thanks again,
Iggy
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
