list,
what model suby ignition switch fits in the 510? and are they exy to buy
new?
thanks
matt.
ps. sorry if this question has already been asked.
-----Original Message-----
From: Diarmuid Tyson <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, 24 October 2000 10:59
Subject: Removing Ignition switch
>I have a lead on a new Subaru ignition switch to replace my tired old datto
>one - thing is, as I can't get the old one out to take along with me to
>ensure I'm getting the correct part - (plus I'll have to remove it to
>install the new one.)
>Two bolts are allen key type, with the hexagonal hole filled up with what
>seems to be some sort of metal. I've tried tapping in a very fine bladed
>screwdriver but the metal is too strong. Other ideas i've had are to epoxy
>a small nut to the end of the bolt, or use the Dremel to try and grind the
>metal out of the hole. Otherwise I can't really see a way of removing the
>steering lock/ingition switch without seriously damaging it.
>Can somebody tell me what I should be doing before I ruin what I've got?
>Thanks,
> Diarmuid.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
