Hi Scott
I have contacted Peter and confirmed that I will be running at Lakeside on
the 18th.
Whats the story with entries? Are there enough? Has it been cancelled?
Whats the latest date that it might be cancelled?
Anyone else on the list having a run?
I would like to know about cancellation ASAP cos I have put work off so I
can do it.
cheers
Mick
----- Original Message -----
From: Scott <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 03, 2000 8:49 AM
Subject: Re: Ultimates Vs Metal Kings (was r31 rear pads)
> Hey Mick
>
> I see you want to do a day at Lakeside. Have you got your name down? Our
> next day is on Saturday November 18. Same weekend as Bathurst. But who
> cares! No dattos in Bathurst. We are struggling to get the required
number
> of entrants. If we don't have enough by this weekend we will pull the
plug.
> bloody shame.
> Regards
> Scott
> -----Original Message-----
> From: Mick Ralph <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Thursday, 2 November 2000 12:37
> Subject: Ultimates Vs Metal Kings (was r31 rear pads)
>
>
> >Pete
> >Thanks for that.. I have always used Metal Kings on every thing and never
> >noticed much in the way of disc wear but so many people (incl Terry) have
> >been telling me to try them that i think my next set will be Ultimates.
> >Actually I have the 4 spots on the front and the commonwhore fronts on
the
> >rear (both on vented discs) and at short sprint type races and
> >motorkhana/autocross i have noticed that they take too long to warm up.
Do
> >u need to warm up Ultimates as much? Are they cheaper? I'm going to do
the
> >Qld datsun day at Lakeside shortly so I think the Metal Kings will be
fine
> >for that..
> >cheers
> >Mick
> >
> >----- Original Message -----
> >From: Pete & Kath Liebig <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Wednesday, November 01, 2000 5:32 PM
> >Subject: RE: r31 rear pads
> >
> >
> >> Mick,
> >>
> >> I put them on because I wanted something that would bite, but the metal
> >> Kings have a reputation for eating disks. (although the Metal King 2's
> are
> >> supposed to be OK - so they say...)
> >>
> >> I spoke to a mate who races club cars and he told me an interesting
> story.
> >> He ran out of (front) pads one day at the track and so was scrounging
> >around
> >> the pits for anything he could lay his hands on. Someone had some
> >Ultimates
> >> and so he whacked them in just so he could compete. He reckons they
were
> >> damn near as good as his proper race pads. Good enough for me.
> >>
> >> My only bitch about them is that they are very dirty. Although a lot of
> >the
> >> modern (asbestos free) pads seem to be like that...
> >>
> >> Pete Liebig
> >>
> >>
> >> -----Original Message-----
> >> From: [EMAIL PROTECTED]
> >> [mailto:[EMAIL PROTECTED]] On Behalf Of
> >> [EMAIL PROTECTED]
> >> Sent: Monday, 1 January 1601 10:30
> >> To: [EMAIL PROTECTED]
> >> Subject: Re: r31 rear pads
> >>
> >> Mick,
> >> We use Ultimates as they don't tear the rotors apart but still have all
> >the
> >> nice qualities of a pad that performs well in most temperatures and
don't
> >> fade
> >> until the rotors are glowing - they wear reasonably well too, although
i
> >> noticed they other day that my pads on both sides have about 20% more
> wear
> >> on
> >> the piston side so I'll have to watch that as the original pads that
came
> >> with
> >> the callipers were worn evenly.
> >>
> >> terry
> >>
> >> > pete
> >> > how do ultimates compare to metal kings?
> >> > i've never used ultimates but i hear a lot of the guys on the list
> >> > talking about them
> >> > cheers
> >> > Mick
> >> > ----- Original Message -----
> >> > From: Pete & Kath Liebig
> >> > To: [EMAIL PROTECTED]
> >> > Sent: Monday, October 30, 2000 9:54 PM
> >> > Subject: RE: r31 rear pads
> >> >
> >> >
> >> > Bendix Ultimates. You need to buy them for a Commodore and then add
> >> > the little dowells to stop the pistons rotating yourself though.
> >> >
> >> > PL
> >> >
> >> > -----Original Message-----
> >> > From: [EMAIL PROTECTED]
> >> > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrew
Peters
> >> > Sent: Monday, 30 October 2000 17:22
> >> > To: [EMAIL PROTECTED]
> >> > Subject: r31 rear pads
> >> >
> >> >
> >> > hi all, just wondering what pads people are using on their rear
> >> > disks?
> >> > cheers
> >> > andrew
> >> >
> >> >
> >> > --membersozdat-------------------------------------------------------
> >> > OZDAT Mailing List Please Note:-
> >> > Send (un)subscribe requests to [EMAIL PROTECTED]
> >> > Send submissions to [EMAIL PROTECTED]
> >> > No unauthorised redistribution of this email
> >> > http://www.ozdat.com/ozdatonline/index.htm
> >> > http://www.ozdat.com/ozdatonline/listindex.html
> >> > http://www.mail-archive.com/[email protected]/
> >> >
> >> > ---------------------------------------------------------------------
> >> >
> >>
--membersozdat-------------------------------------------------------
> >> > OZDAT Mailing List Please Note:-
> >> > Send (un)subscribe requests to [EMAIL PROTECTED]
> >> > Send submissions to [EMAIL PROTECTED]
> >> > No unauthorised redistribution of this email
> >> > http://www.ozdat.com/ozdatonline/index.htm
> >> > http://www.ozdat.com/ozdatonline/listindex.html
> >> > http://www.mail-archive.com/[email protected]/
> >>
---------------------------------------------------------------------
> >> >
> >> ---------------------------------------------------------------------
> >>
> >>
> >> ----------------------------------------------------------------
> >> This message was sent using Dynamite Internet's Web Mail System.
> >> http://home.dynamite.com.au/
> >>
> >>
> >>
> >>
> >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
