i can design them up on comp as dxf file and get them laser cut,
i have a large bar and plate core (any one want it?)
but was too expensive to get welded or glued
unless u weld it yourself (i can't weld alloy)
i bought my new 250mm x 500mm x 73mm core
for $200 and SL charged me $250 for the tanks
it's a top to bottom core not a cross flow
problem with truck cores is that u need more cores
at a shorter distance not less cores that are longer
might cool better but u start having flow problems
Heath
----- Original Message -----
From: "jamesf" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, 9 November 2000 1:53
Subject: Re: Intercooler fitting... Help
> I do believe it is a Garrett one....
> I actually have a source for the endplates, just have to follow it up.
> A friend bought one for his Rex... and he had them done. From
> memory I think he said it cost him about $120odd....
>
> I was thinking of getting a couple of meter's of it machined up....
> I will let you know what I come up with...
>
> Cya
> JamesF
>
>
>
> andrew smith wrote:
>
> > Good luck with the intercooler. From the pic it looks like the older
Garrett
> > type with the tubes machine welded to the end plates.Cutting them down
to 2
> > or 3 is easy but making them not as wide is a problem. I've done some
and
> > there a lot of work unless you can find someone who makes end plates to
> > suit, even with these its still alot of work cleaning up the tubes
after
> > there cut.The later model Garrett cores are vacum glued to the end
plates
> > and are a lot easier to pull apart. Lately I've been using the mercedes
or
> > the mitsubishi truck cores as these are only 500mm wide at the plates.
The
> > last mitsi core i picked up is the same as an evo core only 3 times as
high.
> > If you find anyone who makes end plates to suit the garrett cores cheap
let
> > me know as making them by hand isn't worth it.
> > Andrew Smith
> > jamesf wrote:
> >
> > > I just picked up my new intercooler... I think I am going to need a
hand
> > >
> > > installing it.... Not sure where I will mount the headlights (or the
> > > grill,
> > > bumper, blinkers radiator etc ... :)
> > >
> > > I tried to find a bigger one but this little one was all I could
find...
> > >
> > > (it's got to impress all the rice boys :)
> > > Now maybe if I weld two together like they did with those Piazza
> > > intercoolers in Hot4s......
> > >
> > > http://www.ozdat.com/ozdat/newintercooler.jpg
> > >
> > > No, seriously... should be able to cut it up to make 2 or 3 very nice
> > > intercoolers
> > >
> > > Bit of a bugger to get home in the dat though. The thing just fitted
> > > across the back
> > > seat.... pressed up against both doors ... just squeezed it in ;)
> > >
> > > Cya
> > > JamesF
> > > OZDAT Online
> > >
> > > --
> > >
________________________________________________________________________
> > >
> > > James Fitness
> > > Director
> > > Data Scribe Australia Pty Ltd
> > > http://www.datascribe.com.au
> > > Computers and Supplies
> > >
> > > OZDAT Online
> > > http://www.datascribe.com.au/ozdatonline/index.htm
> > >
> >
>
> --
> ________________________________________________________________________
>
> James Fitness
> Director
> Data Scribe Australia Pty Ltd
> http://www.datascribe.com.au
> Computers and Supplies
>
> OZDAT Online
> http://www.datascribe.com.au/ozdatonline/index.htm
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
