Daniel, You will not mark the discs if you put a right angled piece of Aluminium over the jaws of the vice, "soft jaws" Cheers Feral Errol www.Datrats.com.au ---------- From: Daniel Kroehn <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Problems seperating 200B discs and hubs Date: Monday, December 04, 2000 23:20 List, I'm wanting to clean up my discs as well as the hub and paint the hubs. The problem is that they don't want to come apart. I took all four bolts out and no amount of RP7 and good old elbow grease wants to seperate these little buggers. I haven't put them in the vice yet, don't want to destroy the discs by putting dents in them. Any suggestions? Thanks in advance. Daniel Kroehn Recommending Datrats, supplying quality datsun performance parts. www.Datrats.com.au --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
