Chris, If the key has busted off flush with the face of the lock (i.e not
beyond the tumbles ) you might be able to get it out still. I did this by
cutting a narrow strip off a thin feeler guage and putting a tiny drop of
super glue on one side. Carefully slide it down the side of the lock, allow
it to stick and pull it out. I've only done this twice but it worked both
times.
I'm not sure if you can even take an ignition lock barrel apart that easily,
never tried.
Good luck.
Eddie
England
510, KP710, B10, KB110,
B110, B120, J710SSS, H230,
G620, P330, SRL311, C30,
VBF10, E10, S12, 910SSS
910 sedan now too!
[EMAIL PROTECTED]
www.ratdat.com
> Hi, went to start my datsun stanza sss the other night and the key broke
> off in the ignition when i went to start it, think the mechanic was
> going to take the ignition assemby thing off and take it apart and get
> the broken 1/2 of the key out or something, but would I be better off
> just going to the wreckers and getting another one, would that be
> cheaper?
>
>
> Chris.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
