Tom,
All Datrally's cams are done by Wade's. The 733 grind is a Wade number.
Another piece of useless information!
Cheers
Feral Errol
mailto:[EMAIL PROTECTED]
http://www.datrats.com.au/
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tom Richardson
Sent: Saturday, February 24, 2001 11:28 PM
To: [EMAIL PROTECTED]
Subject: FW: Turbo'd L series (from the grave)
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of andrew smith
Sent: Monday, 12 February 2001 12:47 AM
To: [EMAIL PROTECTED]
Subject: Re: Turbo'd L series (from the grave)
< snip >
Another milder cam I've tried is the 733A which has 270 duration,114 lobe
seperation and
320 lobe lift which is a good street cam for a smallish turbo.
< snip >
ZAC!!! We just pulled a 733A cam OUT of your motor!!! DOH!!! I have a
feeling we're going to get very good at this :)
I wish Datrally would stamp their grind numbers on the back of the cam and
not the front behind the cam sprocket hehe
- Tom
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
