Errol,
you wouldn't happen to have a contact number for them as Telstra hasn't
got them listed.
Thanks again
Jamie
-----Original Message-----
From: Errol Smith [mailto:[EMAIL PROTECTED]]
Sent: Sunday, February 25, 2001 6:28 PM
To: [EMAIL PROTECTED]
Subject: RE: ca18det exhaust manifold - extractors
Jamie,
Probably the best place in Melbourne is Mankhen automotive, but it will
be
expensive.$650 + for the set I believe.
Cheers
Feral Errol
mailto:[EMAIL PROTECTED]
http://www.datrats.com.au/
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jamie Scott
Sent: Sunday, February 25, 2001 12:13 PM
To: [EMAIL PROTECTED]
Subject: ca18det exhaust manifold - extractors
Hi listers,
I have just had a ca18det put into my Nissan Gazelle and after a week of
driving the exhaust manifold gasget has blown...sounds like a simple
remove manifold , replace gasget, install manifold and away you go - no
way. After being told by an exhaust place, that I would have to remove
the engine to get the manifold off, I decided to do it myself - now the
fun begins. Two of the manifold bolts are completely blocked by the
turbo and seem almost impossible to remove. Anyways, to cut to the
chase, rather than frig around with the manifold again further down the
track, I was thinking of installing extractors and was wondering if any
of you guys could recommend anywhere that either would have them already
made or could make some up at a reasonable price. I'm in Melbourne.
Thanks in advance.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
