Terry! thanks for your reply.
I'm so sorry but I meant hub height not offset, I don't know what I was
thinking :)
Though I think Richard summed it up almost.
zac
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 08, 2001 7:17 PM
Subject: Re: rear brake question
> Zac,
> I can't see how the offset has got anything to do with track variances on
the
> rear. There is a slight widening ~4mm from stock drums to R31 discs which
is
> the difference in the thickness of the drum backing plate and the R31 hub.
This
> simply pushes the wheels out +4mm each side and reduces the stock stud
thread
> available by the same amount.
>
> So, where the rotor is mounted in relation to the hub is only going to
give you
> clearance problems to sort out, no track problems though as far as i can
see.
>
> regards
> Terry
>
> > List, just a question that I have:
> > Would there be a track difference between using a vented rear disc with,
> > eg 60mm offset and a solid disc with 60mm offset?
> > I can't see how there would be, but best to ask.
> >
> > zac
> >
> ---------------------------------------------------------------------
>
>
> ----------------------------------------------------------------
> This message was sent using Dynamite Internet's Web Mail System.
> http://home.dynamite.com.au/
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
